manualshive.com logo in svg

Hyundai 2005 Elantra, Owner'S Manual

Looking for a free Instruction Manual for your Hyundai 2005 Elantra? Look no further! Enhance your vehicle ownership experience by downloading the detailed manual from our website. With step-by-step instructions and comprehensive information, this manual will assist you in making the most of your Elantra's features and functionality.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

30

NOTE:

o Both the driver's and front passenger's

pre-tensioner seat belts will be activated
in certain frontal collisions. The pre-
tensioner seat belts can be activated
alone or, where the frontal collision is
severe enough, together with the
airbags.
The pre-tensioners will not be activated
if the seat belts are not being worn at the
time of the collision.

o When the pre-tensioner seat belts are

activated, a loud noise may be heard and
fine dust, which may appear to be smoke,
may be visible in the passenger com-
partment. These are normal operating
conditions and are not hazardous.

CAUTION:

o The sensor that activates the SRS airbag

is connected with the pre-tensioner seat
belt. The SRS airbag warning light          on
the instrument panel will blink for ap-
proximately 6 seconds after the ignition
key has been turned to the "ON" posi-
tion, and then it should turn off.

o If the pre-tensioner seat belt is not work-

ing properly, this warning light will illu-
minate even if there is no malfunction of
the SRS airbag system.
If the SRS airbag warning light does not
illuminate when the ignition key is turned
to "ON", or if it remains illuminated after
blinking for approximately 6 seconds, or
if it illuminates while the vehicle is being
driven, please have an authorized
Hyundai dealer inspect the pre-tensioner
seat belts and SRS airbag system as
soon as possible.

!

!

WARNING:

To obtain maximum benefit from a pre-
tensioner seat belt:

1. The seat belt must be worn correctly.
2. The seat belt must be adjusted to the

correct position.

3. Be sure you and your passengers always

wear seat belts and wear them properly.

o Although it is harmless, the fine dust

may cause skin irritation and should not
be breathed for prolonged periods. Wash
your hands and face thoroughly after an
accident in which the pre-tensioner seat
belts were activated.

AIR

BAG

The seat belt pre-tensioner system consists
mainly of the following components. Their loca-
tions are shown in the illustration.

1. SRS airbag warning light
2. Seat belt pre-tensioner assembly
3. SRS control module

B180B01E

Driver's airbag

1

2

3

Passenger's
airbag

xdflhma-1a.p65

2/5/2008, 2:02 PM

30

Summary of Contents for 2005 Elantra

































































































































































































































































Reviews:

No comments

Related manuals for 2005 Elantra

RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
Trailboss HD86 Fitting Instructions preview
HD86
Brand: Trailboss Pages: 5
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
Air Lift WirelessAIR 73000EZ Manual preview
WirelessAIR 73000EZ
Brand: Air Lift Pages: 12
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8
PUTCO Molle Panels Assembly And Instruction Manual preview
Molle Panels
Brand: PUTCO Pages: 2
Coolster CHALLENGER GK-6125A 2018 Manual preview
CHALLENGER GK-6125A 2018
Brand: Coolster Pages: 45
AA Products KX205 Instruction Manual preview
KX205
Brand: AA Products Pages: 8
Maxon 299018-01 Instruction preview
299018-01
Brand: Maxon Pages: 10
Webasto Thermo Top E Installation Documentation preview
Thermo Top E
Brand: Webasto Pages: 28
Prorack K442 Fitting Instructions Manual preview
K442
Brand: Prorack Pages: 15
American muscle 71324 Manual preview
71324
Brand: American muscle Pages: 3
DIGITAL DELAY 1014-SCR Instructions Manual preview
1014-SCR
Brand: DIGITAL DELAY Pages: 11
Safe Fleet PRIME DESIGN HRR-NV11B Manual preview
PRIME DESIGN HRR-NV11B
Brand: Safe Fleet Pages: 12

Brands by name

Popular brands

Load more brands