manualshive.com logo in svg

Hyundai 2005 Elantra, Owner'S Manual, Page: 49 / 256

Share
Download
Hyundai 2005 Elantra Owner'S Manual Download Page 49

1

FEATURES OF YOUR HYUNDAI

38

B990B04Y-GAT

Side Impact Airbag

Your Hyundai is equipped with a side impact
airbag in each front seat. The purpose of the
airbag is to provide the vehicle's driver and/or
front passenger with protection in a side impact
in addition to that offered by the seat belt alone.
The side impact airbags are designed to deploy
only during certain side impact collisions, de-
pending on the crash severity, angle, speed and
point of impact. The side impact airbags are not
designed to deploy in all side impact situations.

B990B02Y

WARNING:

o The side impact airbag is supplemental

to the driver's and the passenger's seat
belt systems and is not a substitute for
them. Your seat belts must be worn at all
times while the vehicle is in motion. The
airbags deploy only in certain side im-
pact conditions severe enough to cause
significant injury to the vehicle occu-
pants.

!

B990B01E

Side airbag
sensor

!

o Do not modify or replace the front pas-

senger seat. Don't place anything on or
attach anything to the front passenger
seat. This can adversely affect the Occu-
pant Classification system.

o Do not sit on sharp objects such as tools

when occupying the front passenger
seat. This can adversely affect the Occu-
pant Classification system.

o Do not use accessory seat covers on the

front seats.

WARNING:

xdflhma-1a.p65

2/5/2008, 2:03 PM

38

Summary of Contents for 2005 Elantra

































































































































































































































































Reviews:

No comments