manualshive.com logo in svg

Hyundai 2005 Elantra, Owner'S Manual

Looking for a free Instruction Manual for your Hyundai 2005 Elantra? Look no further! Enhance your vehicle ownership experience by downloading the detailed manual from our website. With step-by-step instructions and comprehensive information, this manual will assist you in making the most of your Elantra's features and functionality.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

49

INSTRUMENT CLUSTER

B270A01A-AAT

BRAKE   PAD  WEAR WARNING   SOUND

The front disc brake pads have wear indicators
that should make a high-pitched squealing or
scraping noise when new pads are needed. The
sound may come and go or be heard all the time
when the vehicle is moving. It may also be heard
when the brake pedal is pushed down firmly.
Expensive rotor damage will result if the worn
pads are not replaced. See your Hyundai dealer
immediately.

B260A01B-GAT

Front Fog Indicator Light
(If installed)

Front fog indicator light comes on whenever the
fog light switch is on.

B260N01A-AAT

Check Engine Malfunction Indi-
cator Light

This light illuminates when there is a malfunction
of an exhaust gas related component, and the
system is not functioning properly so that the
exhaust gas regulation values are not satisfied.
This light will also illuminate when the ignition key
is turned to the "ON" position, and then it will go
out in a few seconds. If it illuminates while
driving, or does not illuminate when the ignition
key is turned to the "ON" position, take your car
to your nearest authorized Hyundai dealer and
have the system checked.

B260R01E-GAT

Set Indicator Light

(

(If installed)

The set indicator light in the instrument cluster
is illuminated when the cruise control switch is
pushed downward to "SET (COAST)".
The set indicator light does not illuminate when
the control switch is in the "CANCEL" position.

B265C01O-AAT

Traction Control
Indicator Lights
(If installed)

The traction control indicators change opera-
tion according to the ignition switch position and
whether  the system is in operation or not.
They will illuminate when the ignition key is
turned to the "ON" position, but should go out
after three seconds. If the TCS or TCS-OFF
indicator stays on, take your car to your autho-
rized Hyundai dealer and have the system
checked. See section 2 for more information
about the TCS.

B280A01A-AAT

FUEL GAUGE

The needle on the gauge indicates the approxi-
mate fuel level in the fuel tank.

Without Trip Computer

With Trip Computer

HXDFL291

HXDFL284

xdflhma-1a.p65

2/5/2008, 2:03 PM

49

Summary of Contents for 2005 Elantra

































































































































































































































































Reviews:

No comments

Related manuals for 2005 Elantra

Happy Orange USB-C Quick Start Manual preview
USB-C
Brand: Happy Orange Pages: 2
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
Jeep GLADIATOR 2022 Owner'S Manual preview
GLADIATOR 2022
Brand: Jeep Pages: 380
Enduro autoSteady AS101 User Manual preview
autoSteady AS101
Brand: Enduro Pages: 48
Camoplast Polaris TATOU 4S Installation Manuallines preview
Polaris TATOU 4S
Brand: Camoplast Pages: 13
Daesung HM-TX-315 User Manual preview
HM-TX-315
Brand: Daesung Pages: 9
Pontiac 2010 Vibe Owner'S Manual preview
2010 Vibe
Brand: Pontiac Pages: 318
Quadratec QuadraTop 11051.0415 Installation Manual preview
QuadraTop 11051.0415
Brand: Quadratec Pages: 8
Packard 1948 eight Operating Instructions Manual preview
1948 eight
Brand: Packard Pages: 25
CITROEN 1953 Traction Avant User Manual preview
1953 Traction Avant
Brand: CITROEN Pages: 26
Westin 32-2250 Instructions preview
32-2250
Brand: Westin Pages: 3
Suzuki SX4 2016 Owner'S Manual preview
SX4 2016
Brand: Suzuki Pages: 504
Cadillac 2011 Cadillac Owner Assistance Information preview
2011 Cadillac
Brand: Cadillac Pages: 48

Brands by name

Popular brands

Load more brands