manualshive.com logo in svg

Hyundai 2005 Elantra, Owner'S Manual

Looking for a free Instruction Manual for your Hyundai 2005 Elantra? Look no further! Enhance your vehicle ownership experience by downloading the detailed manual from our website. With step-by-step instructions and comprehensive information, this manual will assist you in making the most of your Elantra's features and functionality.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

17

AIR CONDITIONING CARE

G140A01A-AAT

Keeping the Condenser Clean

The air conditioning condenser (and engine
radiator) should be checked periodically for
accumulation of dirt, dead insects, leaves, etc.
These can interfere with maximum cooling ef-
ficiency. When removing such accumulations,
brush or hose them away carefully to avoid
bending the cooling fans.

!

G140C01A-AAT

Lubrication

To lubricate the compressor and the seals in the
system, the air conditioning should be run for at
least 10 minutes each week. This is particularly
important during cool weather when the air
conditioning system is not otherwise in use.

G140B01A-AAT

Checking the Air Conditioning
Operation

1. Start the engine and let it run at a fast idle for

several minutes with the air conditioning set
at the maximum cold setting.

2. If the air coming out of the in-dash vents is

not cold, have the air conditioning system
inspected by your Hyundai dealer.

CAUTION:

Running the air conditioning system for
extended periods of time with a low refrig-
erant level may damage the compressor.

CRANK PULLEY

G140D01A

A/C

TENSION PULLEY

When the air conditioning is being used regu-
larly, the compressor drive belt tension should
be checked at least once a month with the
engine turned off.
To check the drive belt tension, press down on
the belt halfway between the engine crankshaft
and compressor pulleys. Pressing with your
finger, you should not be able to deflect this belt
anymore than 1/3 of an inch. If you have the
instruments to check it, with a force of 22 lb.
(98N), the deflection should be 0.315 inches
(approx 8.0 mm). If the belt is too loose, have it
adjusted by your Hyundai dealer.

G140D01A-AAT

Checking the Compressor Drive Belt

0.315 in. (8 mm)

xdflhma-6.p65

2/5/2008, 2:13 PM

17

Summary of Contents for 2005 Elantra

































































































































































































































































Reviews:

No comments

Related manuals for 2005 Elantra

Gardigo MARTEN-FREE CAR Instruction Manual preview
MARTEN-FREE CAR
Brand: Gardigo Pages: 36
M7 SPEED R56 Installation Manual preview
R56
Brand: M7 SPEED Pages: 11
GMC 2010 Tahoe Owner'S Manual preview
2010 Tahoe
Brand: GMC Pages: 120
Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
Jeep Cherokee 1977 Owner'S Manual preview
Cherokee 1977
Brand: Jeep Pages: 136
Vauxhall Astra 2021 Owner'S Manual preview
Astra 2021
Brand: Vauxhall Pages: 259
Jeep WRANGLER 2017 User Manual preview
WRANGLER 2017
Brand: Jeep Pages: 292
newmotion Dynamic Power Management Home - Module Installation Instruction preview
Dynamic Power Management Home - Module
Brand: newmotion Pages: 20
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33
Audiovox Rear Observation System Package RVMPKG2 Installation Manual preview
Rear Observation System Package RVMPKG2
Brand: Audiovox Pages: 15
Chevrolet 2012 Malibu Owner'S Manual preview
2012 Malibu
Brand: Chevrolet Pages: 376
ZeroRPM IMS2 Operator'S Manual preview
IMS2
Brand: ZeroRPM Pages: 41
Jeep GRAND CHEROKEE 4xe 2023 Owner'S Manual preview
GRAND CHEROKEE 4xe 2023
Brand: Jeep Pages: 440
FORM FIT HD 22K12 Installation Instructions preview
HD 22K12
Brand: FORM FIT Pages: 4
Whelen Engineering Company Traffic Advisor TA1252L Installation Manual preview
Traffic Advisor TA1252L
Brand: Whelen Engineering Company Pages: 4
Cadillac 2013 ATS Release Note preview
2013 ATS
Brand: Cadillac Pages: 9
SSANGYONG Actyon Sports 2006 Manual preview
Actyon Sports 2006
Brand: SSANGYONG Pages: 90

Brands by name

Popular brands

Load more brands