manualshive.com logo in svg

Hyundai 2005 Elantra, Owner'S Manual

Looking for a free Instruction Manual for your Hyundai 2005 Elantra? Look no further! Enhance your vehicle ownership experience by downloading the detailed manual from our website. With step-by-step instructions and comprehensive information, this manual will assist you in making the most of your Elantra's features and functionality.

Share
Download
background image

3

WHAT TO DO IN AN EMERGENCY

5

SPARE TIRE

!

D040A01E-AAT

TEMPORARY SPARE TIRE

The following instructions for the tem-
porary spare tire should be observed:

1. Check inflation pressure as soon as

possible  after installing the spare
tire, and adjust to the specified pres-
sure. The tire pressure should be
periodically checked and maintained
at the  specified pressure while the
tire is stored.

Spare Tire Pressure

CAUTION:

Serious loss of engine coolant indicates
there is a leak in the cooling system and this
should be checked as soon as possible by
a Hyundai dealer.

Tire Size

Inflation Pressure

T125/70D(R)15

60 psi (420 kPa)

2. The spare tire should only be used

temporarily and should be returned
to the luggage compartment as soon
as the original tire can be repaired or
replaced.

3. Continuous use at speeds of over 50

mph (80 km/h) is not recommended.

!

CAUTION:

o Do not use snow chains with your

temporary spare tire.

o Do not use more than one tempo-

rary spare tire at a time.

o Do not tow a trailer while the tem-

porary spare tire is installed.

4. As the temporary spare tire is spe-

cifically designed for your car, it
should not be used on any other
vehicle.

5. The temporary spare tire should not

be used on any other wheels, nor
should standard tires, snow tires,
wheel covers or trim  rings be used
with the temporary spare wheel. If
such use is attempted, damage to
these items or other car components
may occur.

6. The temporary spare tire pressure

should  be checked once a month
while the tire is stored.

xdflhma-3.p65

2/5/2008, 2:10 PM

5

Summary of Contents for 2005 Elantra

































































































































































































































































Reviews:

No comments

Related manuals for 2005 Elantra

Alpine eX-10 Installation Manual preview
eX-10
Brand: Alpine Pages: 8
Streetwize LeisureWize EMOVE EM303A Manual preview
LeisureWize EMOVE EM303A
Brand: Streetwize Pages: 20
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
Subaru 360 Sedan Service Manual preview
360 Sedan
Brand: Subaru Pages: 16
Buick 2015 LaCrosse Getting To Know Manual preview
2015 LaCrosse
Brand: Buick Pages: 20
J. Strong JST506BT Installation Instructions preview
JST506BT
Brand: J. Strong Pages: 2
Connects2 CTUPO01 Quick Start Manual preview
CTUPO01
Brand: Connects2 Pages: 8
Volvo XC60 2014 Wiring Diagrams preview
XC60 2014
Brand: Volvo Pages: 362
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8
Green Valley 601951 Instructions Manual preview
601951
Brand: Green Valley Pages: 17
Yakima FreshSesh PowderHound Manual preview
FreshSesh PowderHound
Brand: Yakima Pages: 18
Weather Guard 234-3-01 Installation Manual preview
234-3-01
Brand: Weather Guard Pages: 8
Porsche 928 GT - 1991 WIRE DIAGRAM Wiring Diagram preview
928 GT - 1991 WIRE DIAGRAM
Brand: Porsche Pages: 30
Chrysler 1953 Truck Owner'S Manual preview
1953 Truck
Brand: Chrysler Pages: 50
Land Pride Accu-Z Razor Z48 Operator'S Manual preview
Accu-Z Razor Z48
Brand: Land Pride Pages: 62
DV8 LBBR-01 Installation Manual preview
LBBR-01
Brand: DV8 Pages: 5
Motorola GMLN1040 User Manual preview
GMLN1040
Brand: Motorola Pages: 28

Brands by name

Popular brands

Load more brands