manualshive.com logo in svg

Hyundai 2005 Elantra, Owner'S Manual

Looking for a free Instruction Manual for your Hyundai 2005 Elantra? Look no further! Enhance your vehicle ownership experience by downloading the detailed manual from our website. With step-by-step instructions and comprehensive information, this manual will assist you in making the most of your Elantra's features and functionality.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

18

C190E01L

NOTE:

1. Never load the trailer with more weight in

the back than in the front. About 60% of
the trailer load should be in the front half
on the trailer and the remaining 40% in
the rear.

2. The total gross vehicle weight with trailer

must not exceed the Gross Vehicle
Weight Rating (GVWR) shown on the
vehicle identification plate (see page 8-
2). The total gross vehicle weight is the
combined weight of the vehicle, driver,
all passengers and their luggage, cargo,
hitch, trailer tongue load and other op-
tional equipment.

3. The front or rear axle weight must not

exceed the Gross Axle Weight Rating
(GAWR) shown on the vehicle identifi-
cation plate (see page 8-2). It is possible
that your towing package does not ex-
ceed the GVWR but exceeds the GAWR.
Improper trailer loading and/or too much
luggage in the trunk can overload the
rear axle. Redistribute the load and check
the axle weight again.

C190E03E-AAT

Trailer Weight Limit

o Keep the tongue load 10% of the total trailer

load.
Tongue load

Total trailer weight

o Tongue loads can be increased or de-

creased by redistributing the load in the
trailer.
This can be verified by checking the total
weight of the loaded trailer and then checking
the load on the tongue.

Tongue load

x 100 = 10% (MAX)

Total trailer weight

C190D01S-AAT

Safety Chains

Should the hitch connection between your ve-
hicle and the trailer or vehicle you are towing fail,
the trailer or vehicle could wander dangerously
across other lanes of traffic and ultimately leave
the roadway. To eliminate this potentially dan-
gerous situation, safety chains, attached be-
tween your car and the trailer or towed vehicle,
are required in most states.

!

CAUTION:

o Never connect a trailer brake system

directly to the vehicle brake system.

o When towing a trailer on steep grades (in

excess of 12%) pay close attention to the
engine coolant temperature gauge to
ensure the engine does not overheat. If
the needle of the coolant temperature
gauge moves across the dial towards
"H" (HOT), pull over and stop as soon as
it is safe to do so, and allow the engine
to idle until it cools down. You may
proceed once the engine has cooled
sufficiently.

xdflhma-2.p65

2/5/2008, 2:08 PM

18

Summary of Contents for 2005 Elantra

































































































































































































































































Reviews:

No comments

Related manuals for 2005 Elantra

Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
Edelbrock 6883 Instructions preview
6883
Brand: Edelbrock Pages: 2
B-Speech Pago INBTHF020 User Manual preview
Pago INBTHF020
Brand: B-Speech Pages: 24
BMW E46/2 Coupe Manual preview
E46/2 Coupe
Brand: BMW Pages: 55
Whispbar K496W Fitting Instructions Manual preview
K496W
Brand: Whispbar Pages: 15
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
N-Com Bluetooth Kit3 PLUS User Instructions And Safety preview
Bluetooth Kit3 PLUS
Brand: N-Com Pages: 36
ADS FlashLogic FLC-FORS-FO1B-FLRSFO1-EN Install Manual preview
FlashLogic FLC-FORS-FO1B-FLRSFO1-EN
Brand: ADS Pages: 25
KLAUS Multiparking trendvario6X00 Service Manual preview
trendvario6X00
Brand: KLAUS Multiparking Pages: 72
Kargo Master 40983 Quick Start Manual preview
40983
Brand: Kargo Master Pages: 18
Kleinn Air Horns RNGR-102-1/220 Installation Manual preview
RNGR-102-1/220
Brand: Kleinn Air Horns Pages: 33
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
Ranger design C24-DL Installation Manual preview
C24-DL
Brand: Ranger design Pages: 14
Hyundai IONIQ HYBRID 2019 Quick Reference Manual preview
IONIQ HYBRID 2019
Brand: Hyundai Pages: 16
FORM FIT HD 22K12 Installation Instructions preview
HD 22K12
Brand: FORM FIT Pages: 4
Whelen Engineering Company Traffic Advisor TA1252L Installation Manual preview
Traffic Advisor TA1252L
Brand: Whelen Engineering Company Pages: 4

Brands by name

Popular brands

Load more brands