manualshive.com logo in svg

Hyundai 2005 Elantra, Owner'S Manual

Looking for a free Instruction Manual for your Hyundai 2005 Elantra? Look no further! Enhance your vehicle ownership experience by downloading the detailed manual from our website. With step-by-step instructions and comprehensive information, this manual will assist you in making the most of your Elantra's features and functionality.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

17

REAR SEAT WARNING

B140A01S-AAT

For the safety of all passengers, luggage or
other cargo should not be piled higher than the
top of the seatback. In addition, do not place
objects on the rear shelf as they may move
forward during braking or in an accident and
may strike and injure vehicle passengers.

B140A01E

SEAT BELTS

!

!

B150A01E-AAT

SEAT BELT PRECAUTIONS

WARNING:

All occupants of the vehicle must wear their
seat belts at all times. Note that this vehicle
is equipped with a Supplemental Restraint
(Airbag) System as discussed beginning
on page 1-31. The seat belts must be used
in conjunction with the supplemental
airbag system. State laws may require that
some or all occupants of the vehicle use
seat belts. The possibility of increased in-
jury or severity of injury in an accident will
be increased if this elementary safety pre-
caution is not observed. In addition, follow
the other instructions provided in this sec-
tion.

B150B03Y-AAT

Infant or Small Child

All 50 states have child restraint laws. You
should be aware of the specific requirements in
your state. Child and/or infant safety seats must
be properly placed and installed in the rear seat.
Information about the use of these restraints
begins on page 1-23.

WARNING:

Every person in your vehicle needs to be
properly restrained at all times, including
infants and children. In a collision, an unre-
strained child can become a "missile" in-
side the car. The force required to hold a
child on your lap could be so great that you
could not hold the child. Any child riding in
the vehicle should always be in a proper
restraint in the rear seat of the vehicle.

xdflhma-1a.p65

2/5/2008, 2:02 PM

17

Summary of Contents for 2005 Elantra

































































































































































































































































Reviews:

No comments

Related manuals for 2005 Elantra

Uniden BTSC1500 Owner'S Manual preview
BTSC1500
Brand: Uniden Pages: 16
Uniden BTSC1500 User Manual preview
BTSC1500
Brand: Uniden Pages: 20
JANE be cool boosty Manual preview
be cool boosty
Brand: JANE Pages: 21
Car-Interface CI-RL4-ELINK Manual preview
CI-RL4-ELINK
Brand: Car-Interface Pages: 23
RuggON VD04 Quick Start Manual preview
VD04
Brand: RuggON Pages: 2
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
Enduro autoSteady AS101 User Manual preview
autoSteady AS101
Brand: Enduro Pages: 48
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
Meta System FrontPlate4 Manual preview
FrontPlate4
Brand: Meta System Pages: 16
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Caltrend LY115 Installation Instructions preview
LY115
Brand: Caltrend Pages: 3

Brands by name

Popular brands

Load more brands