manualshive.com logo in svg

Hyundai 2003 Sonata, Owner'S Manual

The Hyundai 2003 Sonata Owner's Manual is a comprehensive guide that provides detailed instructions and information on operating and maintaining your vehicle. This essential manual can be downloaded for free from manualshive.com, ensuring you have access to the necessary resources to enhance your driving experience.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

   1- 59

B570A01L-GAT

HOOD RELEASE

1. Pull the release knob to unlatch the hood.
2. Press the safety catch lever up and lift the

hood.

3. Raise the hood by hand.

When closing the hood, slowly close the hood
and make sure it locks into place.

o Do not "TOP-OFF" after the first nozzle

shut off when refueling.

o The fuel cap must be tightened at least

3 clicks, otherwise "      " light will
illuminate.

1MS104008

B560B01L-GAT

Manual Fuel Filler Lid Release

If the fuel filler lid cannot be opened using the
remote opener, a manual opener handle is
located inside the trunk on the left side. Open the
fuel filler lid by pulling on this handle as shown
in the illustration.

HXG115

WARNING:

o Always double check to be sure that the

hood is firmly latched before driving
away. If it is not latched, the hood could
fly open while the vehicle is being driven,
causing a total loss of visibility, which
might result in an accident.

o Do not move the vehicle with the hood

in the raised position, as vision is ob-
structed and the hood could fall or be
damaged.

HEF-134A

!

Summary of Contents for 2003 Sonata














































































































































































































Reviews:

No comments

Related manuals for 2003 Sonata

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
K&M 8494 Installation Manual preview
8494
Brand: K&M Pages: 3
Velleman CAMCOLC1N User Manual preview
CAMCOLC1N
Brand: Velleman Pages: 6
Dacia 2014 Sandero Driver'S Handbook Manual preview
2014 Sandero
Brand: Dacia Pages: 238
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Caraudio-Systems v.LOGiC Intelligent Solution V5-NTG46 Manual preview
v.LOGiC Intelligent Solution V5-NTG46
Brand: Caraudio-Systems Pages: 18
Menabo JUZA Fitting Instructions Manual preview
JUZA
Brand: Menabo Pages: 12
AddSecure Asset Light Installation Manual preview
Asset Light
Brand: AddSecure Pages: 14
TATA Motors Sumo Victa EX Owner'S Manual & Service Book preview
Sumo Victa EX
Brand: TATA Motors Pages: 92
Yakima K614 Manual preview
K614
Brand: Yakima Pages: 12
FALCON RIDGE CF-1000-WD05 Instructions For Installation And Care preview
CF-1000-WD05
Brand: FALCON RIDGE Pages: 6
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
Belkin F8V9017 User Manual preview
F8V9017
Brand: Belkin Pages: 2
Aries 205039 Installation Manual preview
205039
Brand: Aries Pages: 5
Mercedes-Benz MY17 c-class Operator'S Manual preview
MY17 c-class
Brand: Mercedes-Benz Pages: 354
Paser UNICOM JVC Installation Manual preview
UNICOM JVC
Brand: Paser Pages: 2

Brands by name

Popular brands

Load more brands