manualshive.com logo in svg

Hyundai 2003 Sonata, Owner'S Manual

The Hyundai 2003 Sonata Owner's Manual is a comprehensive guide that provides detailed instructions and information on operating and maintaining your vehicle. This essential manual can be downloaded for free from manualshive.com, ensuring you have access to the necessary resources to enhance your driving experience.

Share
Download
background image

6- 18  

DO-IT-YOURSELF MAINTENANCE

G200A01Y-GAT

CHECKING AND REPLACING
FUSES
Replacing a Fusible Link

G200B01Y-GAT

Replacing Accessory Fuse

G190A01A-AAT

CHECKING DRIVE BELTS

Drive belts should be checked periodically for
proper tension and adjusted if necessary. At the
same time, belts should be examined for cracks,
wear, fraying or other evidence of deterioration
and replaced if necessary.
Belt routing should also be checked to be sure
there is no interference between the belts and
other parts of the engine. After a belt is replaced,
the new belt should be adjusted again after two
or three weeks to eliminate slack resulting from
initial stretching after use.

A fusible link will melt if the electrical circuits from
the battery are ever overloaded, thus prevent-
ing damage to the entire wiring harness. (This
could be caused by a  short in the system
drawing too much current.) If this ever happens,
have a Hyundai dealer determine the cause,
repair the system and replace the fusible link.
The fusible links are located in a under hood
junction box for easy inspection.

!

The instrument panel junction box for the lights
and other electrical accessories will be found
low on the dashboard on the driver’s side. Inside
the box you will find a list showing the circuits
protected by each fuse.

CAUTION:

When replacing a fusible link, never use
anything but a new fusible link with the
same or lower amperage rating. Never use
a piece of wire or a higher-rated fusible link.
This could result in serious damage and
create a fire hazard.

HSM396

G200A01L

G200B01Y

Bad

Good

V6

Power
steering

Power
steering

Auto
tensioner

Generator

Generator

Eng.pulley

Eng.pulley

COMP

COMP

Eng.coolant

0.30~0.48in. 0.24~0.35in.

DOHC

Summary of Contents for 2003 Sonata














































































































































































































Reviews:

No comments

Related manuals for 2003 Sonata

ZAPTEC Go Quick Manual preview
Go
Brand: ZAPTEC Pages: 64
ZAPTEC Go Installation Manual preview
Go
Brand: ZAPTEC Pages: 24
Jeep GLADIATOR 2022 Owner'S Manual preview
GLADIATOR 2022
Brand: Jeep Pages: 380
PAC Stinger ELEV8 Install Manual preview
Stinger ELEV8
Brand: PAC Pages: 14
Kolpin 98310 Product Instructions preview
98310
Brand: Kolpin Pages: 3
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Fab Fours H4550 Installation Instructions Manual preview
H4550
Brand: Fab Fours Pages: 13
Gator GHWCUSB2 User Manual preview
GHWCUSB2
Brand: Gator Pages: 8
benbat BM721 Instructions For Use Manual preview
BM721
Brand: benbat Pages: 14
SPL FE Z33 Installation Instructions preview
FE Z33
Brand: SPL Pages: 5
Dometic LMC Eriba Nova Service Manual preview
LMC Eriba Nova
Brand: Dometic Pages: 24
Ford F-250 Super Duty 2022 Owner'S Manual preview
F-250 Super Duty 2022
Brand: Ford Pages: 740
Pogo Alert+ Operating Instructions Manual preview
Alert+
Brand: Pogo Pages: 40
Kolpin 1466 Product Instructions preview
1466
Brand: Kolpin Pages: 6
VP Autoparts 419420 Installation preview
419420
Brand: VP Autoparts Pages: 2
ROLEC WallPod Series Installation Instructions preview
WallPod Series
Brand: ROLEC Pages: 2
RAWLINK 36772 Instruction Manual preview
36772
Brand: RAWLINK Pages: 25
SAN HIMA ROOF-RACK-T User Manual preview
ROOF-RACK-T
Brand: SAN HIMA Pages: 8

Brands by name

Popular brands

Load more brands