manualshive.com logo in svg

Hyundai 2003 Sonata, Owner'S Manual

The Hyundai 2003 Sonata Owner's Manual is a comprehensive guide that provides detailed instructions and information on operating and maintaining your vehicle. This essential manual can be downloaded for free from manualshive.com, ensuring you have access to the necessary resources to enhance your driving experience.

Share
Download
background image

6- 20  

DO-IT-YOURSELF MAINTENANCE

!

!

G230A03A-AAT

POWER STEERING FLUID LEVEL

G220B01A-AAT

Checking Engine Cooling Fan

The engine cooling fan should come on auto-
matically if the engine coolant temperature is
high.

G220A01A-AAT

CHECKING ELECTRIC COOLING
FANS

G220C01A-AAT

Checking Condenser Cooling Fan

The condenser coolant fan should come on
automatically whenever the air conditioning is in
operation.

G210B02A-AAT

Checking the Battery

Keep the battery clean. Any evidence of corro-
sion around the battery posts or terminals
should be removed using a solution of house-
hold baking soda and warm water. After the
battery terminals are dry, cover them with a light
coating of grease.

While batteries are being charged (either by a
battery charger or by the vehicle's generator),
they produce explosive gases. Always ob-
serve these warnings to prevent injuries from
occurring:
o Charge batteries only in a well ventilated

area.

o Do not permit flames, sparks or smoking in

the area.

o Keep children away from the area.

WARNING:

The cooling fan is controlled by engine
coolant temperature and may sometimes
operate even when the engine is not run-
ning. Use extreme caution when working
near the blades of the coolant fan, so that
you are not injured by a rotating fan blade.
As the engine coolant temperature de-
creases the fan will automatically shut off.
This is a normal condition.

The power steering fluid level should be checked
regularly. To check the power steering fluid
level, be sure the engine is "OFF", then check
to make certain that the power steering fluid
level is between the "MAX" and "MIN" level
markings on the fluid reservoir.

NOTE:

Grinding noise from the power steering
pump may be heard immediately after the
engine is started in extremely cold condi-
tions (below - 4°F). If the noise stops during
warm up, there is no abnormal function in
the system. It is due to a power steering
fluid characteristic in extremely cold condi-
tions.

G230A03Y

PROPOSITION 65 WARNING:

Battery posts, terminals, and related acces-
sories contain lead and lead compounds,
chemicals known to the state of California
to cause cancer and reproductive harm.
Wash hands after handling.

!

Summary of Contents for 2003 Sonata














































































































































































































Reviews:

No comments

Related manuals for 2003 Sonata

Kargo Master 40020 Assembly Manual preview
40020
Brand: Kargo Master Pages: 6
Jeep 2009 Wrangler Quick Reference Manual preview
2009 Wrangler
Brand: Jeep Pages: 12
Jeep 2008 Liberty Installation Instructions Manual preview
2008 Liberty
Brand: Jeep Pages: 6
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
CITROEN C8 NaviDrive Manual preview
C8 NaviDrive
Brand: CITROEN Pages: 52
Safe Fleet RVS-218627 Instruction Manual preview
RVS-218627
Brand: Safe Fleet Pages: 38
Ironton 44596 Owner'S Manual preview
44596
Brand: Ironton Pages: 7
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
Cadillac 2007 CTS Owner'S Manual preview
2007 CTS
Brand: Cadillac Pages: 518
Opel OPEL INSIGNIA Infotainment Manual preview
OPEL INSIGNIA
Brand: Opel Pages: 141
STC 552-010 Installation Instructions Manual preview
552-010
Brand: STC Pages: 6
Quadratec 12226.3011 Installation Manual preview
12226.3011
Brand: Quadratec Pages: 8
Actia SmarTach Manual preview
SmarTach
Brand: Actia Pages: 102
Chevrolet Malibu 2014 Owner'S Manual preview
Malibu 2014
Brand: Chevrolet Pages: 428
Cadillac 2004 ESCALADE Customer Convenience/Personalization Manual preview
2004 ESCALADE
Brand: Cadillac Pages: 20
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
Mitsubishi MOTORS PAJERO SPORT Manual preview
PAJERO SPORT
Brand: Mitsubishi MOTORS Pages: 416

Brands by name

Popular brands

Load more brands