manualshive.com logo in svg

Hyundai 2003 Sonata, Owner'S Manual

The Hyundai 2003 Sonata Owner's Manual is a comprehensive guide that provides detailed instructions and information on operating and maintaining your vehicle. This essential manual can be downloaded for free from manualshive.com, ensuring you have access to the necessary resources to enhance your driving experience.

Share
Download
background image

1- 38  

FEATURES OF YOUR HYUNDAI

!

B290A01A-AAT

ENGINE COOLANT TEMPERATURE
GAUGE

WARNING:

Never remove the radiator cap when the
engine is hot. The engine coolant is under
pressure and could erupt and cause severe
burns. Wait until the engine is cool before
adding coolant to the reservoir.

The needle on the engine coolant temperature
gauge should stay in the normal range. If it
moves across the dial to "H" (Hot), pull over and
stop as soon as possible and turn off the engine.
Then open the hood and check the coolant
reservoir level and the water pump drive belt. If
you suspect cooling system trouble, have your
cooling system checked by a Hyundai dealer as
soon as possible.

B300A01A-AAT

SPEEDOMETER

Your Hyundai's speedometer is calibrated in
miles per hour (on the outer scale) and kilome-
ters per hour (on the inner scale).

HEF-009

HEF-008B

B280A01A-AAT

FUEL GAUGE

The needle on the gauge indicates the approxi-
mate fuel level in the fuel tank. The fuel capacity
is given in Section 9.

HEF-010

B270A01A-AAT

BRAKE PAD WEAR  WARNING SOUND

The front disc brake pads have wear indicators
that should make a high-pitched squealing or
scraping noise when new pads are needed. The
sound may come and go or be heard all the time
when the vehicle is moving. It may also be heard
when the brake pedal is pushed down firmly.
Excessive rotor damage will result if the worn
pads are not replaced. See your Hyundai dealer
immediately.

Summary of Contents for 2003 Sonata














































































































































































































Reviews:

No comments

Related manuals for 2003 Sonata

Camcar 40000 Manual preview
40000
Brand: Camcar Pages: 6
Jeep GRAND CHEROKEE 2023 Information Manual preview
GRAND CHEROKEE 2023
Brand: Jeep Pages: 108
PAC SWI-RC Installation Instructions preview
SWI-RC
Brand: PAC Pages: 4
PAC RP4-CH11 Manual preview
RP4-CH11
Brand: PAC Pages: 4
PAC BCI-CH41 User Manual preview
BCI-CH41
Brand: PAC Pages: 8
PAC C2R-CHY4 Installation Instructions preview
C2R-CHY4
Brand: PAC Pages: 5
FORM FIT 1303 Installation Instructions preview
1303
Brand: FORM FIT Pages: 2
BMW 323Ci Manual preview
323Ci
Brand: BMW Pages: 189
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
APS IA06SJD4B Installation Instructions preview
IA06SJD4B
Brand: APS Pages: 3
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
Xingyun XY40EV Service Manual preview
XY40EV
Brand: Xingyun Pages: 74
Volvo 30795637 User Manual preview
30795637
Brand: Volvo Pages: 92
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Chevrolet 1995 C/K Pickup Owner'S Manual preview
1995 C/K Pickup
Brand: Chevrolet Pages: 483
HOLDEN Malibu EM 2015 Owner'S Handbook Manual preview
Malibu EM 2015
Brand: HOLDEN Pages: 330
Toyota Sienna 2000 Operating Manual preview
Sienna 2000
Brand: Toyota Pages: 277
Front Runner TBRA020 Quick Start Manual preview
TBRA020
Brand: Front Runner Pages: 7

Brands by name

Popular brands

Load more brands