manualshive.com logo in svg

Hyundai 2003 Sonata, Owner'S Manual

The Hyundai 2003 Sonata Owner's Manual is a comprehensive guide that provides detailed instructions and information on operating and maintaining your vehicle. This essential manual can be downloaded for free from manualshive.com, ensuring you have access to the necessary resources to enhance your driving experience.

Share
Download
background image

FEATURES OF YOUR HYUNDAI

   1- 27

NOTE:

o Both the driver's and front passenger's

pre-tensioner seat belts will be activated
in certain frontal collisions. The pre-
tensioner seat belts can be activated
alone or, where the frontal collision is
severe enough, together with the
airbags.

o When the pre-tensioner seat belts are

activated, a loud noise may be heard and
fine dust, which may appear to be smoke,
may be visible in the passenger com-
partment. These are normal operating
conditions and are not hazardous.

o Although it is harmless, the fine dust

may cause skin irritation and should not
be breathed for prolonged periods. Wash
your hands and face thoroughly after an
accident in which the pre-tensioner seat
belts were activated.

CAUTION:

o Because the sensor that activates the

SRS airbag is connected with pre-
tensioner seat belt, the SRS airbag warn-
ing light      on the instrument panel will
blink for approximately 6 seconds after
the ignition key has been turned to the
"ON" position, and then it should turn
off.

o If the pre-tensioner seat belt is not work-

ing properly, this warning light will illu-
minate even if there is no malfunction of
SRS airbag system. If the SRS airbag
warning light does not illuminate when
the ignition key is turned to "ON" or if it
remains illuminated after blinking for
approximately 6 seconds, or if it illumi-
nates while the vehicle is being driven,
please have an authorized Hyundai dealer
inspect the pre-tensioner seat belt or
SRS airbag system as soon as possible.

!

AIR

BAG

WARNING:

o Pre-tensioners are designed to operate

only one time. After activation, pre-
tensioner seat belts must be replaced.
All seat belts, of any type, should always
be replaced after they have been worn
during a collision.

o The pre-tensioner seat belt assembly

mechanisms become hot during activa-
tion. Do not touch the pre-tensioner seat
belt assemblies for several minutes after
they have been activated.

o Do not attempt to inspect or replace the

pre-tensioner seat belts yourself. This
must be done by an authorized Hyundai
dealer.

o Do not strike the pre-tensioner seat belt

assemblies.

o Do not attempt to service or repair the

pre-tensioner seat belt system in any
manner.

o Improper handling of the pre-tensioner

seat belt assemblies, and failure to heed
the warnings to not strike, modify, in-
spect, replace, service or repair the pre-
tensioner seat belt assemblies may lead
to improper operation or inadvertent
activation and serious injury.

o Always wear the seat belts when driving

or riding in a motor vehicle.

Summary of Contents for 2003 Sonata














































































































































































































Reviews:

No comments

Related manuals for 2003 Sonata

HALE MM-03 Driver Manual preview
MM-03
Brand: HALE Pages: 44
Napoli NPL-TV 7874 DIGITAL Instruction Manual preview
NPL-TV 7874 DIGITAL
Brand: Napoli Pages: 20
Kuda-Phonebase 055040 Installation Instruction preview
055040
Brand: Kuda-Phonebase Pages: 3
Jaeger 21360508 Fitting Instructions Manual preview
21360508
Brand: Jaeger Pages: 13
Valueline SVL-CARCAM11 User Manual preview
SVL-CARCAM11
Brand: Valueline Pages: 40
Yakima K1198 Instructions Manual preview
K1198
Brand: Yakima Pages: 10
BENDIX C-5 CUT OUT COCK Manual preview
C-5 CUT OUT COCK
Brand: BENDIX Pages: 2
Cadillac 2013 Cadillac CTS-V Specifications preview
2013 Cadillac CTS-V
Brand: Cadillac Pages: 6
Fcar F501 EOBD Operating Manual preview
F501 EOBD
Brand: Fcar Pages: 15
PAC RP4-CH11 Instruction Manual preview
RP4-CH11
Brand: PAC Pages: 7
AEM 21-5011 Installation Manuallines preview
21-5011
Brand: AEM Pages: 5
CEMO DT-Mobil Easy 200 L Original Operating Instructions preview
DT-Mobil Easy 200 L
Brand: CEMO Pages: 80
Honda 2013 Civic Hybrid Technology Reference Manual preview
2013 Civic Hybrid
Brand: Honda Pages: 19
Cadillac Escalade 2019 Owner'S Manual preview
Escalade 2019
Brand: Cadillac Pages: 416
Nav TV OPI-A Quick Start Manual preview
OPI-A
Brand: Nav TV Pages: 3
Leitner ACS FORGED Manual preview
ACS FORGED
Brand: Leitner Pages: 26
Escort SmartCord Live User Manual preview
SmartCord Live
Brand: Escort Pages: 23
ClipperCreek HCS-D Series User Manual preview
HCS-D Series
Brand: ClipperCreek Pages: 40

Brands by name

Popular brands

Load more brands