manualshive.com logo in svg

Hyundai 2003 Sonata, Owner'S Manual

The Hyundai 2003 Sonata Owner's Manual is a comprehensive guide that provides detailed instructions and information on operating and maintaining your vehicle. This essential manual can be downloaded for free from manualshive.com, ensuring you have access to the necessary resources to enhance your driving experience.

Share
Download
background image

6- 16  

DO-IT-YOURSELF MAINTENANCE

G150A01A-AAT

CHECKING STEERING WHEEL
FREE-PLAY

G140D01A-AAT

Checking the Compressor Drive Belt

G140C01A-AAT

Lubrication

To lubricate the compressor and the seals in the
system, the air conditioning should be run for at
least 10 minutes each week. This is particularly
important during cool weather when the air
conditioning system is not otherwise in use.

G140B01A-AAT

Checking the Air Conditioning Opera-
tion

1. Start the engine and let it run at a fast idle for

several minutes with the air conditioning set
at the maximum cold setting.

2. If the air coming out of the in-dash vents is

not cold, have the air conditioning system
inspected by your Hyundai dealer.

CAUTION:

Running the air conditioning system for
extended periods of time with a low refrig-
erant level may damage the compressor.

!

When the air conditioning is being used regu-
larly, the compressor drive belt tension should
be checked at least once a month with the
engine turned off.
To check the drive belt tension, press down on
the belt halfway between the engine crankshaft
and compressor pulleys. Pressing with your
finger, you should not be able to deflect this belt
anymore than 1/3 of an inch. If you have the
instruments to check it, with a force of 22 lb.
(98N), the deflection should be 0.315 inches
(approx 8.0 mm). If the belt is too loose, have it
adjusted by your Hyundai dealer.

To check the steering wheel free-play, stop the
car with the wheels pointed straight ahead and
gently move the steering wheel back and forth.
Use very light finger pressure and be sensitive
to changes in resistance that mark the limits of
the free-play. If the free-play is greater than
specified, have it inspected by your Hyundai
dealer and adjusted or repaired if necessary.

HSM396

G150A01Y

Maximum
1.18 in.
(30 mm)

DOHC

V6

Eng.pulley

COMP

Eng.pulley

COMP

0.315 in.

Auto tensioner

Summary of Contents for 2003 Sonata














































































































































































































Reviews:

No comments

Related manuals for 2003 Sonata

Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
APEXi V-AFC II Instruction Manual preview
V-AFC II
Brand: APEXi Pages: 18
Prorack K519 Fitting Instructions For Basic Carrier preview
K519
Brand: Prorack Pages: 15
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
Van Guard VG273 Fitting Instructions preview
VG273
Brand: Van Guard Pages: 3
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
JCROffroad JEEP GL ADIATOR JT TOPPER ROOF RACK Install Instructions Manual preview
JEEP GL ADIATOR JT TOPPER ROOF RACK
Brand: JCROffroad Pages: 7
Vecow IVH-9000-2R440Q User Manual preview
IVH-9000-2R440Q
Brand: Vecow Pages: 110
Kia CADENZA 2017 Features & Functions Manual preview
CADENZA 2017
Brand: Kia Pages: 58
Horn Tools HJIMRR02FIT Mounting Instructions preview
HJIMRR02FIT
Brand: Horn Tools Pages: 12
Metra Electronics 99-5026 Installation Instructions Manual preview
99-5026
Brand: Metra Electronics Pages: 20
Mazda 3 Facelift 2006 Training Manual preview
3 Facelift 2006
Brand: Mazda Pages: 94
Alfa Romeo Giulietta 2.0 JTDM Manual preview
Giulietta 2.0 JTDM
Brand: Alfa Romeo Pages: 14
Yakima K974 Manual preview
K974
Brand: Yakima Pages: 11
Toyota 2011 Camry SE V6 Brochure & Specs preview
2011 Camry SE V6
Brand: Toyota Pages: 33
Lexus 2010 RX 350 Warranty And Services Manual preview
2010 RX 350
Brand: Lexus Pages: 82

Brands by name

Popular brands

Load more brands