manualshive.com logo in svg

Hyundai 2003 Santa Fe, Owner'S Manual

The Hyundai 2003 Santa Fe Owner's Manual is a comprehensive guide to navigating and maintaining your vehicle. Experience hassle-free ownership with this essential manual, available for free download at manualshive.com. Unlock the full potential of your Santa Fe with this easily accessible resource.

Share
Download
background image

1- 48  

FEATURES OF YOUR HYUNDAI

B420A01A-AAT

CIGARETTE LIGHTER

For the cigarette lighter to work, the key must
be in the "ACC" position or the "ON" position.
To use the cigarette lighter, push it all the way
into its socket. When the element has heated,
the lighter will pop out to the "ready" position.
Do not hold the cigarette lighter pressed in. This
can damage the heating element and create a
fire hazard.
If it is necessary to replace the cigarette lighter,
use only a genuine Hyundai replacement or its
approved equivalent.

B500D06O-GAT

POWER OUTLET (If installed)

These are located in the quarter trim and on the
center facia panel.
These supply 12V electric power to operate
electric accessories or equipment only when
the key is in the "ON" or "ACC" position.

B420A01O

B500D01O

2. Adjust the date by pushing "     (UP)", "

(DOWN)" button when the hour/minute
blinks.

3. After adjusting the time, push "M" button

once more and all adjustment is completed.

NOTE:

When the battery has been reconnected or
charged, set the date and time as described
above. However, the first adjusting mode is
set on DEC 01.

B410A01A-AAT

INSTRUMENT PANEL LIGHT CON TROL
(RHEOSTAT)

The instrument panel lights can be made brighter
or dimmer by turning the instrument panel light
control knob.

B410A01O

Summary of Contents for 2003 Santa Fe






























































































































































































































Reviews:

No comments

Related manuals for 2003 Santa Fe

Pacbrake 10475 Installation Manual preview
10475
Brand: Pacbrake Pages: 9
Eclipse AVN 2210p mkII Operation Manual preview
AVN 2210p mkII
Brand: Eclipse Pages: 6
Federal Signal Corporation Vision SLR Quick Disconnect Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Federal Signal Corporation Vision SLR Supplement Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
Ford 2008 Mustang Quick Reference Manual preview
2008 Mustang
Brand: Ford Pages: 2
RAM CHASSIS CAB 3500 2017 Quick Reference Manual preview
CHASSIS CAB 3500 2017
Brand: RAM Pages: 16
Monacor CARPOWER CAP-12XHQ Manual preview
CARPOWER CAP-12XHQ
Brand: Monacor Pages: 5
Jeep Grand Cherokee WK2 Owner'S Manual preview
Grand Cherokee WK2
Brand: Jeep Pages: 338
BMW Wireless Charging Station Universal Instructions For Use Manual preview
Wireless Charging Station Universal
Brand: BMW Pages: 160
Thule 1308 Instructions Manual preview
1308
Brand: Thule Pages: 8
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
UAZ UAZ-374195 Operating Manual preview
UAZ-374195
Brand: UAZ Pages: 90
Reese Explore 63153 Instruction Manual preview
63153
Brand: Reese Explore Pages: 9
Safe Fleet RVS systems RVS-M641 Instruction Manual preview
RVS systems RVS-M641
Brand: Safe Fleet Pages: 24
PEUGEOT 108 2017 Vehicle Instruction Card preview
108 2017
Brand: PEUGEOT Pages: 17

Brands by name

Popular brands

Load more brands