manualshive.com logo in svg

Hyundai 2003 Santa Fe, Owner'S Manual

The Hyundai 2003 Santa Fe Owner's Manual is a comprehensive guide to navigating and maintaining your vehicle. Experience hassle-free ownership with this essential manual, available for free download at manualshive.com. Unlock the full potential of your Santa Fe with this easily accessible resource.

Share
Download
background image

3- 10  

WHAT TO DO IN AN EMERGENCY

!

D080B02O-AAT

Towing a Car With Manual Transaxle

D080C02A-AAT

Towing a Car With Automatic Transaxle

o If the car is being towed with the rear wheels

on the ground, be sure the parking brake is
released.

o If the car is being towed with the front wheels

on the ground, be sure that the transaxle is
in neutral. Also, be sure that the ignition key
is in the "ACC" position. This is necessary to
prevent damage to the steering lock mecha-
nism, which is not designed to hold the front
wheels straight while the car is being towed.

o If any of the loaded wheels or suspension

components are damaged, a towing dolly
must be used.

CAUTION:

o When towing the 2WD vehicle with the

rear wheels on the ground, the vehicle
should be towed with wheel lift type
truck.
Otherwise, the CV joint boot can inter-
fere with the towing hook caused by
insufficient clearance resulting in CV
joint boot damage.

o 4 Wheel Drive cannot be towed with a

tow truck. It must be towed by lifting all
4 wheels.

CAUTION:

A car with an automatic transaxle should
never be towed from the rear with the front
wheels on the ground. This can cause se-
rious damage to the transaxle. If the car
must be towed from the rear, a towing dolly
must be used under the front wheels.

If the car is being towed with the rear wheels on
the ground, be sure the parking brake is re-
leased.

NOTE:

Before towing, check the level of the
transaxle fluid. If it is below the "HOT" mark
on the dipstick, add fluid. If you cannot add
fluid, a towing dolly must be used as de-
scribed above.

D080B01O-1

D080C01O

D080C02O

o DO NOT TOW 4WD
o OK FOR AUTOMATIC OR MANUAL

TRANSAXLE EQUIPPED VEHICLE
WITH NO DAMAGE (except 4WD)

o DO NOT TOW 4WD
o NOT OK FOR AUTOMATIC

TRANSAXLE EQUIPPED VEHICLE

o OK FOR MANUAL TRANSAXLE

(except 4WD)

o OK FOR AUTOMATIC  OR MANUAL

TRANSAXLE EQUIPPED VEHICLE

!

Summary of Contents for 2003 Santa Fe






























































































































































































































Reviews:

No comments

Related manuals for 2003 Santa Fe

LAMBORGHINI URUS Quick Manual preview
URUS
Brand: LAMBORGHINI Pages: 48
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Brand: Cadillac Pages: 90
Mercedes-Benz GUARD S 500 Supplement To Operators Manual preview
GUARD S 500
Brand: Mercedes-Benz Pages: 30
Xpresskit DBALL2-HYUNDAI9 Installation And Quick Reference Manual preview
DBALL2-HYUNDAI9
Brand: Xpresskit Pages: 13
RAM 2011 3500 Chassis Cab User Manual preview
2011 3500 Chassis Cab
Brand: RAM Pages: 92
Skoda Fabia II 2007 Workshop Manual preview
Fabia II 2007
Brand: Skoda Pages: 165
Gator GHWCUSB2 User Manual preview
GHWCUSB2
Brand: Gator Pages: 8
benbat BM721 Instructions For Use Manual preview
BM721
Brand: benbat Pages: 14
SPL FE Z33 Installation Instructions preview
FE Z33
Brand: SPL Pages: 5
Softride 26428 Instructions preview
26428
Brand: Softride Pages: 4
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
Yakima Landing Pad 11 Manual preview
Landing Pad 11
Brand: Yakima Pages: 28
Cadillac Escalade 2004 Escalade ESV Owner'S Manual preview
Escalade 2004 Escalade ESV
Brand: Cadillac Pages: 472
Westin 28-21030 Instructions preview
28-21030
Brand: Westin Pages: 3
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
G-Tech Pro Competition User Manual preview
Pro Competition
Brand: G-Tech Pages: 180
HAKR HV1160 Quick Start Manual preview
HV1160
Brand: HAKR Pages: 2

Brands by name

Popular brands

Load more brands