manualshive.com logo in svg

Hyundai 2003 Santa Fe, Owner'S Manual

The Hyundai 2003 Santa Fe Owner's Manual is a comprehensive guide to navigating and maintaining your vehicle. Experience hassle-free ownership with this essential manual, available for free download at manualshive.com. Unlock the full potential of your Santa Fe with this easily accessible resource.

Share
Download
background image

DO-IT-YOURSELF MAINTENANCE

   6- 13

!

G100A02O-AAT

CHECKING THE TRANSAXLE OIL
(MANUAL)

Transaxle lubricant in the manual transaxle
should be checked at those intervals specified
in the vehicle maintenance schedule in Section
5.

Recommended Oil

Use only HYUNDAI GENUINE PARTS MTF
75W/90 (API GL-4) or EQUIVALENT in the
manual transaxle.

Manual Transaxle Oil Capacity

The oil capacity of the manual transaxle is 2.43
U.S. quarts (2.3 liters).

HSM435

Filler plug

Drain plug

G110B03A-AAT

Recommended Fluid

Your Hyundai automatic transaxle is specially
designed to operate with HYUNDAI GENUINE
ATF or DIAMOND ATF SP-III or SK ATF SP-III.
Damage caused by a nonspecified fluid is not
covered by your new vehicle limited warranty.

G110A01A-AAT

CHECKING THE TRANSAXLE FLUID
(AUTOMATIC)

Transaxle fluid in the automatic transaxle should
be checked at those intervals specified in the
vehicle maintenance schedule in Section 5.

G100B02A-AAT

To Check the Manual Transaxle Fluid
Level

WARNING:

It is always better to check the transaxle oil
level when the engine is cool or cold. If the
engine is hot, you should exercise great
caution to avoid burning yourself on hot
engine or exhaust parts.

Park the car on level ground with the engine off.

1. Using a wrench of the correct size, loosen

the oil filler plug by turning it counterclock-
wise and remove it with your fingers.

2. Use your finger or suitable tool to feel inside

the hole. The oil level should be at its bottom
edge. If it is not, check for leaks before
adding oil. To refill the transaxle or bring the
oil level up,add oil slowly until it reaches the
proper level. Do not overfill.

3. Replace the plug and washer, screw it in with

your fingers and then tighten securely with
the wrench.

SSA6100B

Summary of Contents for 2003 Santa Fe






























































































































































































































Reviews:

No comments

Related manuals for 2003 Santa Fe

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
Aries P35-2004 Installation Manual preview
P35-2004
Brand: Aries Pages: 3
Ford FOCUS RS 2018 Owner'S Manual Supplement preview
FOCUS RS 2018
Brand: Ford Pages: 52
Kolpin 25-9250 Owner'S And Operator'S Manual preview
25-9250
Brand: Kolpin Pages: 25
minnid 1.240.344 Operating Instructions Manual preview
1.240.344
Brand: minnid Pages: 44
Porsche 01-B Web Application Manual preview
01-B
Brand: Porsche Pages: 313
TATA Motors 2013 Nano Owner'S Manual preview
2013 Nano
Brand: TATA Motors Pages: 136
Mynew Portable Car Umbrella User Manual preview
Portable Car Umbrella
Brand: Mynew Pages: 5
NavLinkz RL4-ELINK Manual preview
RL4-ELINK
Brand: NavLinkz Pages: 23
Pontiac 2006 Relay Getting To Know Manual preview
2006 Relay
Brand: Pontiac Pages: 20
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Brand: Billien Pages: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Brand: Lexus Pages: 28
Voxx Electronics CA-510a Installation Instructions Manual preview
CA-510a
Brand: Voxx Electronics Pages: 15
Pet Gear TL9000 Instruction Manual preview
TL9000
Brand: Pet Gear Pages: 4
Suzuki IGNIS 2022 Series Manual preview
IGNIS 2022 Series
Brand: Suzuki Pages: 570
LedGlow Advanced Million Color Installation Instructions preview
Advanced Million Color
Brand: LedGlow Pages: 4

Brands by name

Popular brands

Load more brands