manualshive.com logo in svg

Hyundai 2003 Santa Fe, Owner'S Manual

The Hyundai 2003 Santa Fe Owner's Manual is a comprehensive guide to navigating and maintaining your vehicle. Experience hassle-free ownership with this essential manual, available for free download at manualshive.com. Unlock the full potential of your Santa Fe with this easily accessible resource.

Share
Download
background image

1- 28  

FEATURES OF YOUR HYUNDAI

!

The seat belt pre-tensioner system consists
mainly of the following components. Their loca-
tions are shown in the illustration.

1. SRS airbag warning light
2. Seat belt pre-tensioner assembly
3. SRS control module

WARNING:

To obtain maximum benefit from a pre-
tensioner seat belt:

1. The seat belt must be worn correctly.
2. The seat belt must be adjusted to the

correct position.

NOTE:

o Both the driver's and front passenger's

pre-tensioner seat belts will be activated
in certain frontal collisions. The pre-
tensioner seat belts can be activated
with the airbags. The pre-tensioners will
be activated even if the seat belts are not
being worn at the time of the collision.

o When the pre-tensioner seat belts are

activated, a loud noise may be heard and
fine dust, which may appear to be smoke,
may be visible in the passenger com-
partment. These are normal operating
conditions and are not hazardous.

o Although it is harmless, the fine dust

may cause skin irritation and should not
be breathed for prolonged periods. Wash
your hands and face thoroughly after an
accident in which the pre-tensioner seat
belts were activated.

B180B02S

1

2

3

Driver's airbag

Passenger's
airbag

The pre-tensioner seat belt operates in a similar
way as an Emergency Locking Retractor (ELR)
type of seat belt. When the vehicle stops sud-
denly, or if the occupant tries to lean forward too
quickly, the seat belt retractor will lock into
position. However, in certain frontal collisions,
the pre-tensioner will activate and pull the seat
belt into tighter contact against the occupant's
body.

B180B01A-AAT

Pre-tensioner Seat Belt

Your Hyundai vehicle is equipped with driver's
and front passenger's pre-tensioner seat belts.
The purpose of the pre-tensioner is to make
sure that the seat belts fit tightly against the
occupant's body in certain frontal collisions.
The pre-tensioner seat belts can be activated
with the airbags.

B180B01S

Summary of Contents for 2003 Santa Fe






























































































































































































































Reviews:

No comments

Related manuals for 2003 Santa Fe

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
Metra Electronics 70-5511 Installation Instructions preview
70-5511
Brand: Metra Electronics Pages: 2
Mitsubishi 1998 FTO Technical Information Manual preview
1998 FTO
Brand: Mitsubishi Pages: 160
Cadillac 2004 CTS Owner'S Manual preview
2004 CTS
Brand: Cadillac Pages: 442
Mobileye C2-270 User Manual preview
C2-270
Brand: Mobileye Pages: 29
FALCON RIDGE CF-UFORCE-DRW01 Instructions For Installation And Care preview
CF-UFORCE-DRW01
Brand: FALCON RIDGE Pages: 6
Volvo V70 2014 Quick Manual preview
V70 2014
Brand: Volvo Pages: 16
T.J.M. T13 Outback Frontal Protection System Fitting Instructions Manual preview
T13 Outback Frontal Protection System
Brand: T.J.M. Pages: 18
Audi PXDXVW3 Quick Start Manual preview
PXDXVW3
Brand: Audi Pages: 4
Easee Base 1-Way User Manual / Installation Manual preview
Base 1-Way
Brand: Easee Pages: 21
Brodit Heavy Duty ProClip Installation Instructions preview
Heavy Duty ProClip
Brand: Brodit Pages: 2
Velleman CAMSET28 User Manual preview
CAMSET28
Brand: Velleman Pages: 17
Rajant 23-100068-001 Quick Start Manual preview
23-100068-001
Brand: Rajant Pages: 11
Ford Mondeo 2007 Owner'S Handbook Manual preview
Mondeo 2007
Brand: Ford Pages: 292
Yakima MegaWarrior Instruction Manual preview
MegaWarrior
Brand: Yakima Pages: 8
GMC 2008 Acadia Getting To Know Manual preview
2008 Acadia
Brand: GMC Pages: 24
U.S. General 6"OFF ROAD LIGHT 95811 Assembly And Operation Instructions Manual preview
6"OFF ROAD LIGHT 95811
Brand: U.S. General Pages: 7

Brands by name

Popular brands

Load more brands