manualshive.com logo in svg

Hyundai 2003 Santa Fe, Owner'S Manual

The Hyundai 2003 Santa Fe Owner's Manual is a comprehensive guide to navigating and maintaining your vehicle. Experience hassle-free ownership with this essential manual, available for free download at manualshive.com. Unlock the full potential of your Santa Fe with this easily accessible resource.

Share
Download
background image

1- 12  

FEATURES OF YOUR HYUNDAI

!

WARNING:

o For maximum effectiveness in case of an

accident, the headrest should be ad-
justed so the top of the headrest is at the
same height as the top of the occupant's
ears. The use of a cushion that holds the
body away from the seatback is not
recommended.

o Do not operate the vehicle with the head-

rests removed as severe injury to an
occupant may occur in the event of an
accident. Headrests may provide pro-
tection against severe neck injuries when
properly adjusted.

B080E01O-AAT

Lumbar Support Control
(Driver's seat only) (If installed)

To adjust the lumbar support, turn the handle on
the outboard or left side of the seat. To increase
the amount of lumbar support, pull the lever
forward. To decrease it, push the lever toward
the rear.

B080D02A-AAT

Adjustable Headrests

Headrests are designed to help reduce the risk
of neck injuries.
To raise the headrest, pull it up. To lower it, push
it down while pressing the lock knob.

HSM365

B080E01O

Lock knob

Summary of Contents for 2003 Santa Fe






























































































































































































































Reviews:

No comments

Related manuals for 2003 Santa Fe

Cadillac 2011 CTS COUPE Personalization Manual preview
2011 CTS COUPE
Brand: Cadillac Pages: 20
Cadillac 2011 CTS COUPE Specifications preview
2011 CTS COUPE
Brand: Cadillac Pages: 2
Cadillac 2009 CTS Owner'S Manual preview
2009 CTS
Brand: Cadillac Pages: 494
Cadillac 2008 Escalade Owner'S Manual preview
2008 Escalade
Brand: Cadillac Pages: 500
Cadillac 2006 Escalade Warranty And Owner Assistance Information preview
2006 Escalade
Brand: Cadillac Pages: 40
Cadillac 2004 DeVille Owner'S Manual preview
2004 DeVille
Brand: Cadillac Pages: 432
Cadillac 1997 Catera Owner'S Manual preview
1997 Catera
Brand: Cadillac Pages: 338
Cadillac 2009 STS Get To Know preview
2009 STS
Brand: Cadillac Pages: 20
Cadillac 2005 STS Owner'S Manual preview
2005 STS
Brand: Cadillac Pages: 438
3SIXT 3S-1186 Operating Instructions Manual preview
3S-1186
Brand: 3SIXT Pages: 12
Harman Kardon DP 2US Quick Start Manual preview
DP 2US
Brand: Harman Kardon Pages: 16
TATA Motors TIAGO XZ 2019 Owner'S Manual preview
TIAGO XZ 2019
Brand: TATA Motors Pages: 184
B&G electronics PW-50C Civilian Installation And Operation Manual preview
PW-50C Civilian
Brand: B&G electronics Pages: 7
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
Qeedon Higlow Series Product Instruction preview
Higlow Series
Brand: Qeedon Pages: 2
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
Paccar PACCHARGE AC20 Installation Manual preview
PACCHARGE AC20
Brand: Paccar Pages: 63

Brands by name

Popular brands

Load more brands