manualshive.com logo in svg

Hyundai 2003 Santa Fe, Owner'S Manual

The Hyundai 2003 Santa Fe Owner's Manual is a comprehensive guide to navigating and maintaining your vehicle. Experience hassle-free ownership with this essential manual, available for free download at manualshive.com. Unlock the full potential of your Santa Fe with this easily accessible resource.

Share
Download
background image

CONSUMER INFORMATION & REPORTING SAFETY DEFECTS

   8- 5

!

I110A01A-AAT

SHOP MANUAL

A Hyundai Shop Manual is available from your
authorized Hyundai dealer. It's written for pro-
fessional technicians, but is simple enough for
most mechanically-inclined owners to under-
stand.

I100A02E-AAT

SPARE TIRE AND TOOLS

WARNING:

o Driving on worn-out tires is dangerous!

Worn-out tires can cause loss of braking
effectiveness, steering control and trac-
tion. When replacing tires, never mix
radial and bias ply tires on the same car.
If you replace radial tires with bias-ply
tires, they must be installed in sets of
four.

o Using tires and wheels of other than the

recommended sizes could cause un-
usual handling characteristics that could
cause death, serious injury, or property
damage.

o Wheels that do not meet Hyundai's di-

mensional specifications may fit poorly
and result in damage to the vehicle,
including broken wheel studs.

Your Hyundai is delivered with the following:

Spare tire and wheel
Wheel nut wrench, Wrench bar
Jack

I120A02A-AAT

WARRANTIES FOR YOUR HYUNDAI
VEHICLE

o New vehicle 60 Months/60,000 Miles Limited

Warranty.

o New vehicle 120 Months/100,000 Miles Lim-

ited Powertrain Warranty (first owner only).

o Anti-Perforation Limited Warranty
o Emission Defect Warranty - Federal Vehicle
o California Emission Control System War-

ranty (if applicable)

o Emission Performance Warranty Federal

vehicle

o Replacement Parts and Accessories Lim-

ited Warranty

NOTE:

Detailed warranty information is provided
in your Hyundai Owner's Handbook.

D060B01O

Summary of Contents for 2003 Santa Fe






























































































































































































































Reviews:

No comments

Related manuals for 2003 Santa Fe

GARO TWIN+ Assembly Instructions / End User Instruction preview
TWIN+
Brand: GARO Pages: 23
GARO LS4 Wallmounted Operational Instructions preview
LS4 Wallmounted
Brand: GARO Pages: 15
Alpine eX-10 Installation Manual preview
eX-10
Brand: Alpine Pages: 8
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
Romik 2137 2D Installation Instructions Manual preview
2137 2D
Brand: Romik Pages: 6
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Condor T-RAMP Quick Start Manual preview
T-RAMP
Brand: Condor Pages: 2
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
Warn 70948 Installation Instructions preview
70948
Brand: Warn Pages: 5
Gator GRM430EM User Manual preview
GRM430EM
Brand: Gator Pages: 6
Fab Fours C3150 Installation Instructions Manual preview
C3150
Brand: Fab Fours Pages: 21
Oldsmobile 2003 Silhouette Owner'S Manual preview
2003 Silhouette
Brand: Oldsmobile Pages: 466
Rugged Ridge 11232.20 Quick Start Manual preview
11232.20
Brand: Rugged Ridge Pages: 2
Mopar 77072498AB Manual preview
77072498AB
Brand: Mopar Pages: 18
Pet Gear TL9000 Instruction Manual preview
TL9000
Brand: Pet Gear Pages: 4
Suzuki IGNIS 2022 Series Manual preview
IGNIS 2022 Series
Brand: Suzuki Pages: 570

Brands by name

Popular brands

Load more brands