manualshive.com logo in svg

Hyundai 2003 Santa Fe, Owner'S Manual

The Hyundai 2003 Santa Fe Owner's Manual is a comprehensive guide to navigating and maintaining your vehicle. Experience hassle-free ownership with this essential manual, available for free download at manualshive.com. Unlock the full potential of your Santa Fe with this easily accessible resource.

Share
Download
background image

1- 76  

FEATURES OF YOUR HYUNDAI

B730A01FC-GAT

Operation Tips

o To keep dust or unpleasant fumes from

entering the car through the ventilation sys-
tem, temporarily set the air intake control
switch to the               position. Be sure to return
the control switch to the            position  when
the irritation has passed to keep fresh air in
the vehicle. This will help keep the driver alert
and comfortable.

o Air for the heating/cooling system is drawn

in through the grilles just ahead of the wind-
shield. Care should be taken that these are
not blocked by leaves, snow, ice or other
obstructions.

o To prevent interior fog on the windshield, set

the air intake control switch to the fresh air
(          ) position and fan speed to the desired
position.

o Adjust the fan control to the desired speed.

For greater cooling, turn the fan control to
one of the higher speeds or temporarily
select the recirculate (        ) position on the
air intake control switch.

B740C02O-AAT

De-Humidified Heating

For dehumidified heating:

o Set the air flow control to the face (       ) position.
o Turn on the air conditioning switch. The air

conditioning indicator light should come on at
the same time.

o Set the air intake control switch to the fresh

air (       ) position.

o Adjust the fan control to the desired speed.
o For more rapid action, set the fan at one of

the higher speeds.

o Adjust the temperature control to provide the

desired amount of warmth.

B740C01O-1

To use the air conditioning to cool the interior:

o Set the side vent control to "      ", to shut off

the outside air entry.

o Set the air flow control to the face (       ) position.
o Turn on the air conditioning switch by push-

ing in on the switch. The air conditioning
indicator light should come on at the same
time.

o Set the air intake control switch to the fresh

air (       ) position.

o Set the temperature control to "Cool". ("Cool"

provides maximum cooling. The tempera-
ture may be moderated by moving the con-
trol toward "Warm".)

B740B02O-AAT

Air Conditioning Operation
(If installed)
Cooling

B740B01O-1

Summary of Contents for 2003 Santa Fe






























































































































































































































Reviews:

No comments

Related manuals for 2003 Santa Fe

A-Tach Mounts ST-1 Instructions preview
ST-1
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50291 Quick Start Manual preview
50291
Brand: A-Tach Mounts Pages: 2
A-Tach Mounts 50206 Instructions preview
50206
Brand: A-Tach Mounts Pages: 2
Quadratec QR3 Installation Manual preview
QR3
Brand: Quadratec Pages: 8
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
Metra Electronics 99-3030B Installation Instructions Manual preview
99-3030B
Brand: Metra Electronics Pages: 12
Halfords Exodus 360 Fitting Instructions preview
Exodus 360
Brand: Halfords Pages: 4
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Brand: Cadillac Pages: 90
Compass 02106 Manual preview
02106
Brand: Compass Pages: 16
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8
Ford 2005 P207 Explorer Sport Trac Owner'S Manual preview
2005 P207 Explorer Sport Trac
Brand: Ford Pages: 540
Velleman CARS4500 User Manual preview
CARS4500
Brand: Velleman Pages: 12
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
BMW 51 47 0 027 792 Installation Instructions Manual preview
51 47 0 027 792
Brand: BMW Pages: 7
Ford 2007 Navigator (Spanish) Owner'S Manual preview
2007 Navigator
Brand: Ford Pages: 728
Westin 58-53935 Installation Instructions preview
58-53935
Brand: Westin Pages: 5
Volvo S90 - ACCESSORY PANEL Owner'S Manual Supplement preview
S90 - ACCESSORY PANEL
Brand: Volvo Pages: 166

Brands by name

Popular brands

Load more brands