Hyundai 2001 Tiburon Owner'S Manual Download Page 91 | Manualshive

Page: 91 / 142

background image

WHAT TO DO IN AN EMERGENCY

3-3

WARNING:

While the engine is running, keep hair, hands,
and clothing away from moving parts such
as the fan and drive belts to prevent injury.

5. If the water pump drive belt is broken or

engine coolant is leaking out, stop the en-
gine immediately and call the nearest
Hyundai dealer for assistance.

WARNING:

Do not remove the radiator cap when the
engine is hot. This can allow coolant to be
blown out of the opening and cause serious
burns.

6. If you cannot find the cause of the overheat-

ing, wait until the engine temperature has
returned to normal. Then, if the engine cool-
ant has been lost, carefully remove the ra-
diator cap and add engine coolant to bring
the fluid level in the reservoir up to the
halfway mark.

7. Proceed with caution, keeping alert for fur-

ther signs of overheating. If overheating hap-
pens again, call a Hyundai dealer for assis-
tance.

CAUTION:

Serious loss of engine coolant indicates
there is a leak in the cooling system and this
should be checked as soon as possible by a
Hyundai dealer.

2. The spare tire should only be used tempo-

rarily and should be returned to the luggage
compartment as soon as the original tire can
be repaired or replaced.

3. Continuous use at speeds of over 50 mph

(80 km/h) is not recommended.

4. As the temporary spare tire is specifically

designed for your car, it should not be used
on any other vehicle.

5. The temporary spare tire should not be used

on any other wheels, nor should standard
tires, snow tires, wheel covers or trim rings
be used with the temporary spare wheel. If
such use is attempted, damage to these
items or other car components may occur.

6. The temporary spare tire pressure should

be checked once a month while the tire is
stored.

D040A01S-AAT

SPARE TIRE

The following instructions for the temporary
spare tire should be observed:

1. Check inflation pressure as soon as practi-

cal  after installing the spare tire, and adjust
to the specified pressure. The tire pressure
should  be  periodically  checked  and  main-
tained at the  specified pressure while the
tire is stored.

Inflation Pressure

Tire Size

T125/70D15

60 psi (420 kPa)

Spare Tire Pressure

CAUTION:

o Do not use snow chains with your tem-

porary spare tire.

o Do not use more than one temporary

spare tire at a time.

D040B01A-AAT

Handling the Spare Tire

Remove the installation bolt to remove the spare
tire. To replace the spare tire in its storage
compartment, tighten the bolt firmly with your
fingers until there is no more play in the spare
tire.

SSA3070K

«
...
89
90
91
92
93
...
»

Summary of Contents for 2001 Tiburon















































































































































Reviews:

No comments

Related manuals for 2001 Tiburon

Brand: Yakima Pages: 8

Brand: Tessera4x4 Pages: 20

Q Access Alpha GSE 2023

Brand: Q Mobility Group Pages: 9

Challenger 2013

Brand: Dodge Pages: 543

Brand: Voxoa Pages: 48

Brand: Black Horse Off Road Pages: 7

Brand: Oldsmobile Pages: 380

Brand: Metra Electronics Pages: 17

Brand: Volvo Pages: 304

TX-STAMP-4-TC01

Brand: Over Armour Offroad Pages: 4

Brand: Hollywood Racks Pages: 8

2013 Cadillac CTS-V

Brand: Cadillac Pages: 6

Brand: Huvitech Pages: 31

2013 Odyssey Touring

Brand: Honda Pages: 21

Brand: Erde Pages: 3

Brand: DV8 Pages: 8

Saddle Tramp BC-DSPX-HD2

Brand: Metra Electronics Pages: 24

Brand: BMPRO Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands