Hyundai 2001 Tiburon Owner'S Manual Download Page 118 | Manualshive

Page: 118 / 142

background image

DO-IT-YOURSELF MAINTENANCE

6-10

G120C02A-AAT

Recommended Brake Fluid

Use only hydraulic brake fluid conforming to
DOT 3 or DOT 4 specifications in your braking
system. Follow the instructions printed on the
container.

G120D01A-AAT

To Check the Fluid Level

The fluid level in the brake fluid reservoir should
be checked periodically. The level should be
between the "MIN" and "MAX" marks on the
side of the reservoir. If the level is at or below
the "MIN" mark, carefully add fluid to bring it up
to "MAX". Do not overfill.

G120E02A-AAT

Adding Brake Fluid

WARNING:

Handle brake fluid carefully. It can damage
your vision if it gets into your eyes. Use only
DOT 3 or DOT 4 specification fluid from a
sealed container. Do not allow the fluid can
or reservoir to remain open any longer than
required. This will prevent entry of dirt and
moisture which can damage the brake sys-
tem and cause improper operation.

To add brake fluid, first wipe away any dirt then
unscrew the fluid reservoir cap. Slowly pour the
recommended fluid into the reservoir. Do not
overfill. Carefully replace the cap on the reser-
voir and tighten.

G130A01S-AAT

CHECKING THE CLUTCH FLUID
To Check the Clutch Fluid

G120E01S

SSA6130A

WARNING:

The cooling fan is controlled by the engine
coolant  temperature  and  may  sometimes
operate  even  when  the  engine  is  not  run-
ning.  Use  extreme  caution  when  working
near the blades of the cooling fan, so that
you are not injured by a rotating fan blade.
As  the  engine  coolant  temperature  de-
creases, the fan will automatically shut off.
This is a normal condition.

G120A01A-AAT

CHECKING THE BRAKES
CAUTION:

Because  brakes  are  essential  to  the  safe
operation  of  the  car,  it  is  suggested  that
they  be  checked  and  inspected  by  your
Hyundai  dealer.  The  brakes  should  be
checked  and  inspected  for  wear  at  those
intervals  specified  in  the  vehicle  mainte-
nance schedule in Section 5.

G120B01A-AAT

Checking the Brake Fluid Level

WARNING:

Use caution when handling brake fluid. It
can damage your vision if it gets into your
eyes. It will also damage your vehicle’s paint
if spilled on it and not removed immediately.

«
...
116
117
118
119
120
...
»

Summary of Contents for 2001 Tiburon















































































































































Reviews:

No comments

Related manuals for 2001 Tiburon

Brand: Lancia Pages: 191

Brand: Hama Pages: 2

Brand: Abarth Pages: 36

Brand: cam Pages: 28

Green Motion Building

Brand: Eaton Pages: 12

HOIST-A-TOP JL CRANK

Brand: Lange Originals Pages: 13

NPL-TV 7874 DIGITAL

Brand: Napoli Pages: 20

Brand: Ford Pages: 37

Brand: Chevrolet Pages: 2

Brand: RAM Pages: 616

Brand: Nav TV Pages: 9

Brand: Honda Pages: 81

Brand: Ford Pages: 52

2008 B2300 Truck

Brand: Mazda Pages: 280

Brand: ACV Pages: 2

Brand: Mazda Pages: 14

Brand: Kargo Master Pages: 17

Brand: Havis Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands