DRIVING YOUR HYUNDAI
2- 6
C090F01A-AAT
o 2 (Second gear):
Use for driving on a slippery road, hill climbing
or engine braking downhill. "2" automatically
shifts between first and second gears.
This means that no shift-up to 3rd gear is
performed. However, the shift-up to third gear is
done when the car speed exceeds a certain
value to prevent the engine from over-revving.
Manually move the selector to "D" returning to
normal driving condition.
C090G01A-AAT
o L (Low gear):
Use for driving up a very steep grade or for
engine braking when descending steep hills.
When downshifting to "L", the transaxle will
temporarily remain in second gear until the
vehicle has slowed enough for low gear to
engage. Do not exceed 31 mph (50 km/h) in low
gear.
C090H01A-AAT
NOTE:
o For smooth and safe operation, depress
the brake pedal when shifting from "Neu-
tral" position or "Park" position to a for-
ward or reverse gear.
o The ignition key must be in the "ON"
position and the brake pedal fully de-
pressed in order to move the shift lever
from the "P" (Park) position to any of the
other positions.
C090I01A-AAT
CAUTION:
o Shift into "R" and "P" position only when
the vehicle has completely stopped.
o Do not accelerate the engine in reverse
or any of the forward positions with the
brakes applied.
o Always apply the footbrake when shift-
ing from "P" or "N", to "R", "D", "2" or
"L" position.
o Do not use the "P" (Park) position in
place of the parking brake. Always set
the parking brake, shift the transaxle into
"P" (Park) position and turn off the igni-
tion when you leave the vehicle, even
momentarily. Never leave the vehicle un-
attended while the engine is running.
o Check the automatic transaxle fluid level
regularly, and add fluid as necessary.
o It is always possible to shift from "R",
"N", "D", "2", "L" position to "P" posi-
tion.
If you cannot move the shift lever from the “P”
(Park) position to any other position with the
brake pedal fully depressed and the ignition key
in the “ON” position, remove the cap on the
console and with a thin object such as a pencil,
push the shift lock release button down. Then,
with the brake pedal depressed, move the shift
lever to the desired position, then the shift lock
release button will automatically return to its
original position after shifting from the “P” (Park)
position. Then, reinstall the cap.
If you need to use the shift lock release, it could
mean your car is developing a problem.
Have the system checked by your Hyundai
dealer.
C090J01A-AAT
SHIFT LOCK RELEASE (If installed)
FUA2110J
