FEATURES OF YOUR HYUNDAI
1- 39
B660E01S-AAT
To Reset at a Faster Speed
1. Push the control switch "RESUME (ACCEL)"
to the left side and hold it.
2. Accelerate to desired speed and release the
control switch. While the control switch is
held, the vehicle will gradually gain speed.
B660F01S-AAT
To Reset at a Slower Speed
1. Push the control button "SET (COAST)" at
the end of the windshield wiper & washer
and hold it. The vehicle will decelerate.
2. When the desired speed is obtained, re-
lease the control button. While the control
switch is pushed, the vehicle speed will
gradually decrease.
STA1700B
WARNING:
o Keep the main switch off when not using
the cruise control.
o Do not use the cruise control when it may
not be safe to keep the car at a constant
speed, for instance, driving in heavy or
varying traffic, or on slippery (rainy, icy or
snow-covered) or winding roads or over
6% up-hill or down-hill roads.
o Pay particular attention to the driving con-
ditions whenever using the cruise control
system.
o During cruise-control driving with a
manual transaxle vehicle, do not shift into
neutral without depressing the clutch
pedal, or the engine will be overrevved. If
this happens, depress the clutch pedal or
release the main switch.
o With the cruise control engaged, when
the brake pedal is applied, it is normal to
hear the cruise control system deactivate.
This is an indication of normal system
operation.
o During normal cruise control operation,
when the "SET(COAST)" is activated or
reactivated after applying the brakes, the
cruise control will energize after approxi-
mately 3 seconds. This delay is normal.
B660C01S-AAT
To Cancel the Cruise Speed
Do one of the followings:
o Depress the brake pedal.
o Depress the clutch pedal (Manual transaxle).
o Shift the selector lever in “N” position (Auto-
matic transaxle).
o Decrease the vehicle speed lower than
memory speed by 12 mph (20 km/h).
o Decrease the vehicle speed approximately
to less than 25 mph (40 km/h).
o Release the main switch.
B660D01S-AAT
To Resume the Preset Speed
The vehicle will automatically resume the speed
set prior to cancellation when you push the
control switch "RESUME (ACCEL)" to the left
side and release it to return providing the ve-
hicle speed is above 25 mph (40 km/h).
STA1700D
