Hyundai 2001 Tiburon Owner'S Manual Download Page 131 | Manualshive

Page: 131 / 142

background image

CONSUMER INFORMATION & REPORTING SAFETY DEFECTS

8-3

I090A01A-AAT

WHEN TO REPLACE TIRES

SSA8060C

0.06 in. (1.6 mm)

Wear indicator

WARNING:

Driving on worn-out tires is dangerous!
Worn-out tires can cause loss of braking
effectiveness, steering control and traction.
When replacing tires, never mix radial and
bias ply tires on the same car. If you replace
radial tires with bias-ply tires, they must be
installed in sets of four.

The original tires on your car have tread wear
indicators.  The  tread  wear  indicators  appear
when the tread depth is 0.06 in. (1.6 mm). The
tire should be replaced when these appear as a
solid  bar  across  two  or  more  grooves  of  the
tread. Always replace your tires with those of
the  recommended size. If  you change   wheels,

I100A01A-AAT

SPARE TIRE AND TOOLS

Your Hyundai is delivered with the following:

down whenever there is rain, snow or ice on the
road.

the new wheel's rim width and offset must meet
Hyundai specification.

WARNING:

o Using tires and wheels of other than the

recommended sizes could cause unusu-
al handling characteristics that could
cause death, serious injury, or property
damage.

o Wheels that do not meet Hyundai's di-

mensional specifications may fit poorly
and result in damage to the vehicle, in-
cluding broken wheel studs.

SSA3070K

Spare tire and wheel
Wrench
Jack
Jack handle

I110A01A-AAT

SHOP MANUAL

A Hyundai Shop Manual is available from your
authorized Hyundai dealer. It's written for pro-
fessional technicians, but is simple enough for
most mechanically-inclined owners to under-
stand.

I120A02A-AAT

WARRANTIES FOR YOUR HYUNDAI
VEHICLE

o New vehicle 60 Months/60,000 Miles Limit-

ed Warranty.

o New vehicle 120 Months/100,000 Miles Lim-

ited Powertrain Warranty (first owner only).

o Anti-Perforation Limited Warranty
o Emission Defect Warranty - Federal Vehicle
o California Emission Control System War-

ranty (if applicable)

o Emission Performance Warranty Federal

vehicle

o Replacement Parts and Accessories Limit-

ed Warranty

NOTE:

Detailed warranty information is provided in
your Hyundai Owner's Handbook.

«
...
129
130
131
132
133
...
»

Summary of Contents for 2001 Tiburon















































































































































Reviews:

No comments

Related manuals for 2001 Tiburon

Brand: Garmin Pages: 2

Brand: Q'STRAINT Pages: 10

Dodge Charger TufBox

Brand: TUFLOC Pages: 6

Brand: Xblitz Pages: 30

Brand: BMW Pages: 189

Brand: Skoda Pages: 281

Prime Design VBI-FT31B

Brand: Safe Fleet Pages: 12

Brand: true-i Pages: 11

Brand: Xforce Pages: 11

KY-700-2018-DRW01

Brand: FALCON RIDGE Pages: 7

Brand: Technaxx Pages: 59

Brand: Dodge Pages: 60

Brand: VER-MAC Pages: 44

Brand: Macally Pages: 19

Brand: TAUBENREUTHER Pages: 10

Brand: Van Guard Pages: 12

Brand: Suzuki Pages: 190

Prime Design FBM-1027

Brand: Safe Fleet Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands