![background image](http://html.mh-extra.com/html/hyundai/160d-9l/160d-9l_manual_2196422087.webp)
3-38
HAZARD SWITCH (OPTION)
Use for parking, or loading truck.
If the switch is left ON for a long time, the battery may be
discharged.
OFF
ON
2)
(1)
ö
35D9AOM17
INCHING SWITCH
If this switch is pressed, inching operation is applied to inching
pedal.
Also, inching lamp on the cluster is illuminated.
3)
(1)
(2)
50D9CD43
50D9CD44
PARKING BRAKE SWITCH
This switch is used to parking brake lock or release.
If this switch is pressed, the parking brake is applied and the
warning lamp on the cluster will comes ON.
When operating the gear selector lever, be sure to release the
parking brake. If the truck is operated with the parking brake
engaged, the brake will overheat and may cause the brake
system to go out of order.
4)
(1)
(2)
ö
MAIN LIGHT SWITCH
This switch is used to operate the head light by one steps.
First step : Clearance lamp and cluster illumination lamp comes
ON. Also, all of the pilot lamps of switches come
ON.
Second step : Head lamp comes ON and head lamp pilot lamp
comes ON.
Refer to page 3-41 for head lamp.
5)
(1)
50D9CD45
START SWITCH
There are three positions, OFF, ON and START.
Â
(OFF)
: None of electrical circuits activate.
Â
(ON)
: All the systems of truck operate.
Â
(START) : Use when starting the engine.
Release key immediately after starting.
Before starting, set gear selector lever at NEUTRAL and place
parking brake switch to LOCK position.
Start switch must be in the ON position with engine running to
maintain electrical and hydraulic function and prevent serious
truck damage.
1)
(1)
ö
ö
77073CD41
Η
Θ
ö