![background image](http://html.mh-extra.com/html/hyundai/160d-9l/160d-9l_manual_2196422210.webp)
7-57
After checking that the fuse is not blown and that there is no disconnection in the wiring
After checking that the fuse is not blown and that there is no disconnection in the wiring
harness, replace the lamp bulb.
harness, replace the lamp bulb.
LAMP BULBS REPLACEMENT
LAMP BULBS REPLACEMENT
5)
5)
110D9OM69
FUNCTIONAL TESTS
FUNCTIONAL TESTS
You will start the engine to complete the functional tests, so be sure that:
·
The parking brake switch is in LOCK position.
·
The gear selector lever is in NEUTRAL.
·
Forks are fully lowered to the floor or ground.
·
All controls are in neutral or other correct position.
·
You are familiar with the safety procedures given in section 5, Starting and operating
Starting and operating
procedures
procedures, in this manual.
As you test the following components, be sure they are properly mounted and working correctly.
Horn
Horn
Press the horn button to check the horn function. If the horn or any other part does not operate,
report the failure and have it repaired before the truck is put into operation.
Hour meter
Hour meter
Start the engine and let it warm up until it runs evenly and accelerates smoothly when you push
on the accelerator pedal. Check the hour meter for operation with the engine running. Write the
hour meter reading on the PM report form. Report any malfunction or damage.
(1)
(1)
(2)
(2)
6)
6)
Lamp
Spec (24V)
Head lamp
70W
Turn signal lamp
LED
Clearance lamp
LED
Stop lamp
LED
Backup lamp
10W
License lamp (option)
10W
Beacon lamp (option)
Strobe type
Work lamp (front/rear)
LED/HID
Indicator lights
Indicator lights
Check that all lights are functioning and indicate normal truck operation as described in section 3,
Know your truck
Know your truck, in this manual.
(3)
(3)
Service brakes and inching pedal
Service brakes and inching pedal
With the gear selector lever in NEUTRAL and the engine running, push the sevice brake pedal
fully down and hold. The brakes should apply before the pedal reaches the floorplate. If the
pedal continues to creep downward, report the failure immediately. Do not operate the truck until
the brakes are repaired. Perform the same check with the inching pedal. (Additional braking/
inching checks will follow).
(4)
(4)