![background image](http://html.mh-extra.com/html/hyundai/160d-9l/160d-9l_manual_2196422188.webp)
7-35
CRANKCASE BREATHER FILTER
CRANKCASE BREATHER FILTER
Do not use pneumatic tools to remove the
Do not use pneumatic tools to remove the
breather cover capscrews. Damage to the
breather cover capscrews. Damage to the
rocker cover can result.
rocker cover can result.
Remove the oil fill cap.
Remove the crankcase breather filter cover cap-
screws.
Remove the filter cover.
Cap
Cover
Capscrew
17)
17)
※
7609A6MI30
(1)
(2)
(3)
Remove the crankcase breather filter from the
rocker lever cover.
Do not disturb the crankcase breather filter
Do not disturb the crankcase breather filter
gasket located on the rocker lever cover.
gasket located on the rocker lever cover.
Exposure to oil can cause the gasket to swell,
Exposure to oil can cause the gasket to swell,
which can make it difficult to install the
which can make it difficult to install the
gasket back into groove. If the gasket comes
gasket back into groove. If the gasket comes
out of the groove, do not attemp to install the
out of the groove, do not attemp to install the
gasket. Replace it with a new gasket.
gasket. Replace it with a new gasket.
Filter
7609A6MI31
(4)
※
※
If the gasket is damaged, remove the gasket by
grasping the tab on the gasket and pulling up.
Clean the crankcase breather filter mounting
surface and O-ring sealing surfaces on the
rocker lever cover.
Clean the crankcase breather filter cover with
warm soapy water.
Inspect the cover for cracks.
Replace the cover if damage is found.
Tab
7609A6MI32
(5)
(6)
(7)