manualshive.com logo in svg

Hyundai 15D-7E, Manual, Page: 96 / 251

Share
Download
Hyundai 15D-7E Manual Download Page 96

3-47

ÿ

iPOD CONNECTION 

POD CONNECTION 

2

1

8

3

3

4

5

6

7

2209S3CD73

iPod selection button 

iPod selection button 

While playing a different mode, press the MODE button to convert 
to iPod mode. Connecting an iPod to the audio will automatically 
convert to iPod mode even if another mode is playing and          
automatically play the songs within the iPod.

MODE

Η

(1)

(1)

2209S3CD70D

Operates only when an iPod is connected. Connecting an iPod to the audio will automatically convert 
to iPod mode. Connecting the USB when the starting switch is in ON state will turn the power on and 
automatically play the songs within the iPod.    

The iPod cable is supplied separately.

Â

Â

TRACK UP/SEEK DOWN button

TRACK UP/SEEK DOWN button

(2)

(2)

While playing music, press the TRACK

Ě

 button to play the      

beginning of the next song. 
Press the SEEK

ě

 button to return to the beginning of the current 

song. Press the button again to play the beginning of the previous 
song. 

FLDR

FLDR

Η

2209S3CD71C

 

1  iPod selection button 

 

2  TRACK UP/SEEK DOWN button

 3 

FF/REW 

button

 

4  Repeat (RPT) button

 

5  Random play (RDM) button

 

6  Scroll (SCR) button

 

7  View music info (INFO) button

 

8  Finding and playing file (SELECT) button

Summary of Contents for 15D-7E




























































































































































































































































Reviews:

No comments