7-59
Check the weight, length, width and height of the
truck referring to the chapter 8, specifications
when you are going to hoist the truck.
Use long wire rope and stay to keep the distance
with the machine as it should avoid touching with
the truck body.
Put a rubber plate where the wire rope contact
with the truck's body to prevent damage.
Place crane on the proper place.
Install the wire rope and stay like the illustration.
Make sure wire rope is proper size.
Make sure that the truck is shut down before
hoisting. Lifting the truck with engine running
can cause serious accident.
The wrong hoisting method or installation of
wire rope can cause damage to driver and
truck.
Do not load abruptly.
Keep area clear of personnel.
14. LOADING AND UNLOADING BY CRANE
1)
2)
3)
4)
5)
Do not install the wire to unsafe position such
as forks, carriage, head guard, counterweight
lifting hole or towing pin, etc.. It can cause
serious injury or damage to driver and truck.
If there is any problem to lift a truck, please
contact your dealer.
Perform the lifting service with skilled service
men.
Wire rope
Fork(X)
Carriage(X)
Towing
pin(X)
(X)
(X)
D357OM53
Stay
Wire rope
Lifting
bracket
5.0 ~ 7.0 TON
D357OM65
If there is lifting brackets on the truck's body, use
them to lift a truck.
Refer to illustration at the right side only for the
trucks such as 80D-7E.
Use appropriate method for your forklift truck.
6)
7)
80D-7E
Stay
Wire rope
Frame
20D/25D/30D/33D-7E ONLY
91FP-00340
ENGINE AIR INTAKE
KEEP WATER AND OTHER
FOREIGN MATERIALS OUT.
A
B
C
D
91FJ-00180
KEEP WATER AND OTHER
FOREIGN MATERIALS OUT.
Mast
20D7EOM65
1.5~7 ton