7-32
OSHA approved eye protection rated for 200kPa(30psi) is required for air cleaning
operation.
Replace element if exhaust is black, or if lack of engine power is noted even after cleaning
or element. When cleaning the element or element housing, cover the air flow outlet port of
the housing with a clean cloth or tape to prevent dirt or dust from entering. Do not clean the
elements by bumping or tapping them.
ENGINE
Engine oil change
Warm up engine oil then park the truck in
level place with forks lowered. Stop the
engine and apply parking brake.
Remove drain plug and drain engine oil.
Also replace the engine oil filter. Check
oil level using dipstick after changing
the engine oil. Dispose of old oil in
locally approved manner.
3)
(1)
Drain plug
D35AOM160
Engine oil filter replacement
Â
Remove the filter using a filter wrench.
Â
Clean the filter by removing dust and oil from the filter base bottom.
Â
Install the new filter after thinly coating the packing surface with engine oil.
A
A
fter replacing the engine oil filter element, start the engine to check for oil leakage from
the filter mounting surface. Check the engine oil level using the dipstick. When adding
engine oil, do not let the oil overflow from the filler port.
Fuel filter replacement
Replace the fuel filler when the engine is cool. Carry out this maintenance in a place away
from fire. Removing the fuel filler will produce explosive fumes. Wipe off any spilled fuel or
oil immediately from the truck or surrounding area.
Using a filter wrench, remove the cartridge.
Fit the new cartridge with fuels coat the surface of the packing lightly with engine oil, then install.
When the fuel filter is replaced, the fuel system should be bled to remove air if the fuel
supply is exhausted during driving.
(2)
(3)
Η
Θ
ö