![background image](http://html.mh-extra.com/html/hyundai/15d-7e/15d-7e_manual_2196421164.webp)
Installation
When installing the element, check that the cleaner housing and element cover are completely in
close contact then tighten the nut.
Make sure that bottom cap are securely installed. If it is loosely installed, dust will be drawn
in and air cleaner will fail to function properly.
When using compressed air, use safety glasses, face shield and other protective clothes.
Never point the air nozzle at anyone. Never clean or replace air cleaner while engine is
running.
7-31
When remounting, connect the ground
connection last.
Do not allow tools to touch the (+) terminal
and the body of the truck at the same time.
This can cause sparking and explosion.
Dispose of old battery in locally approved
manner.
Θ
A
A
IR CLEANER ELEMENT
Removal
Double element type
Remove the cover by pulling off the clamps,
and loosen the wing nut to pull out the outer
element.
During periodic service, replace only the
outer element. Do not replace the inner
element unless damaged.
2)
(1)
Η
ö
Inner element
Outer element
Clamp
Cleaning
Cleaning with compressed air
Blow dry compressed air(Max 30psi) from inside
along pleats. Next blow air form outside along
pleats, then blow from inside again and check
element.
Cleaning with cleaning agent
If there is grease or carbon on the element, use
a special element cleaner, following the
instruction given with the cleaner. Have a spare
element ready so that the machine can start
working again immediately.
(2)
Connect (-) lead last
1
Neg(-)
Pos(+)
2
D155OM12
20DFOM26
D35AOM158
(3)
ö
Keep clean condition for the air cleaner element all the times.
A dirty air cleaner could be decreased output power of the engine at worst and it also will
be caused to increase fuel consumption and black smoke.
Η
Η
Θ
ö