![background image](http://html.mh-extra.com/html/hyundai/15d-7e/15d-7e_manual_2196421175.webp)
Lift mechanisms and controls
Pull back on the tilt control lever and hold until
the mast reaches the full back tilt position. Push
forward on the lever to return the mast to the
vertical position. Release the lever.
Be sure that there is adequate overhead
clearance before raising the mast.
Pull back on the lift control lever and raise the
fork carriage to full height. Watch the mast
assembly as it rises. Release the lever.
If the maximum fork height is not reached, this
indicates there is an inadequate(low) oil level in
the hydraulic sump tank or severe binding within
the mast.
Push forward on the lift control lever. Watch the
mast as it lowers. When the forks reach the
floor, release the lever.
All movements of the mast, fork carriage, and lift
chains must be even and smooth, without
binding or jerking. Watch for chain wobble or
looseness; the chains should have equal tension
and move smoothly without noticeable wobble.
Auxiliary controls(Option)
If your lift truck is equipped with an attachment,
test the control lever for correct function and
briefly operate the attachment.
Service brakes and inching pedal
With the direction control in NEUTRAL and the engine running, push the service brake pedal fully
down and hold. The brakes should apply before the pedal reaches the floor plate. If the pedal
continues to creep downward, report the failure immediately. Do not operate the truck until the
brakes are repaired. Perform the same check with the inching pedal.(Additional braking/inching
checks will follow).
Parking brake
Check the function of the parking brake. Release, then reapply. To check parking brake holding
capability, park the lift truck on a grade and apply the parking brake. The parking brake should
hold a lift truck with rated load on a 15% grade.
Do not operate a lift truck if the service or parking brakes are not operating properly.
(4)
(5)
(6)
(7)
7-42
D255OM168
Indicator lights
Check that all lights are functioning and indicate normal truck operation as described in section 3,
Know your truck, in this manual.
(3)