![background image](http://html.mh-extra.com/html/hyundai/15d-7e/15d-7e_manual_2196421188.webp)
7-55
10. HANDLING MACHINE IN EXTREMELY HOT PLACES
Pay careful attention particularly to the following
points when handling the machine in extremely hot
places.
ÿ
ÿ
Cooling system
Scale and rust form more easily in the cooling
system, so wash with anticorrosion liquid. Always
try to have clean and soft water circulating in the
system.
Clogging of the radiator fins is one cause of
overheating, so use air or water jets to clean the
fins. When doing this, the air nozzle must be at
right angles to the radiator.
Â
Air pressure max : 2kgf
cm
2
(30psi)
Check the fan belt tension. If it is too slack, adjust the tension. (SEE 8. SPECIFICATIONS)
In case of overheating, do not stop the engine immediately.
Run the engine at low idling.
Open the hood to ventilate the engine compartment.
When the water temperature drops, stop the engine.
Check the cooling water level. If it is low, add more water.
W
W
ear safety glasses and a face shield when using compressed air. Never touch the radiator
cap while the engine is hot. Steam may spurt out. Wait until the water temperature drops. It
is extremely dangerous to try to check the fan belt tension while the engine is running. When
inspecting the fan belt or other moving parts, or near such parts, always stop the engine first.
Always keep fill the coolant to specified level and check for coolant leaks if necessary.
1)
2)
3)
4)
ö
(1)
(2)
(3)
(4)
D35AOM173
ÿ
Battery
In case of operating the machine in hot weather, it will be fallen fast the electrolyte level of the battery.
Always check the electrolyte level of the battery and make sure that the level is kept near the upper
level.