Hyster CHALLENGER H165XL, Operating Manual

Page: 13 / 117

MODEL DESCRIPTION
11
NAMEPLATE
The rated capacity for the lift truck, as it is equipped, must
be shown on the nameplate. See FIGURE 2. If the lift
truck nameplate already has a rating for special load han-
dling equipment, it will be shown. If the lift truck nameplate
does not show the rated capacity, or if the lift truck equip-
ment does not match that shown on the nameplate, the lift
truck must not be operated until its capacity is known.
WARNING
When a lift truck is shipped incomplete from the fac-
tory, the nameplate is covered by a label as shown in
FIGURE 2. If your lift truck has this type of decal, do
not operate the lift truck. Contact your HYSTER lift
truck dealer to obtain a complete nameplate.
DO NOT add to or modify the lift truck. Any change to
the lift truck, the tires or its equipment can change
the lifting capacity. The lift truck must be rated as
equipped and the nameplate must show the new ca-
pacity rating.
SAFETY LABELS
Safety labels are installed on the lift truck to give informa-
tion about possible hazards. It is important that all safety
labels are installed on the lift truck and can be read. See
FIGURE 3.
This unit was shipped incomplete from factory/
The U.S.A. Occupational Safety and Health Act of 1970 and other
national safety codes require the installation of a completed nameplate
showing unit configuration and rated capacity. Completed nameplates
may be obtained through your HYSTER dealer.
NOTICE TO USER
TRUCK MODEL
Serial no.
Approx. weight
FIGURE 2. NAMEPLATE AND LABELS
NAMEPLATE
1304058R
0
INCOMPLETE LABEL
NOTICE LABEL
Property of American Airlines