Hyster CHALLENGER H165XL, Operating Manual

Page: 85 / 117

MAINTENANCE
83
tainers for the fork pins and push the pins from the car-
riage. Move the lift truck away from the forks.
Forks, Installation
1. Put the forks approximately 1 m (3 ft) in front of the
carriage.
2. Slowly move the lift truck toward the forks until the fork
pins can be installed. Install the fork pins, fork guides and
the retainers.
3. FORK PIN DAMAGE
4. MUST BE 90% OF
DIMENSION X
5. FORK WEAR
1
5
3
3
2
11195
FIGURE 17. CHECK THE FORKS
X
4
1. TIP ALIGNMENT
(MUST BE WITHIN 3%
OF FORK LENGTH)
2. CRACKS
FORK TIP ALIGNMENT
LENGTH OF FORKS 3% DIMENSION
1220 mm (48 in) 37 mm (1.45 in)
1830 mm (72 in) 55 mm (2.15 in)
2440 mm (96 in) 74 mm (2.90 in)
Property of American Airlines