Hyster CHALLENGER H165XL, Operating Manual

Page: 45 / 117

OPERATING PROCEDURES
43
is moving rapidly, slow to a walking speed before chang-
ing the direction of travel.
WARNING
Do not start to move the lift truck until the air pres-
sure gauge indicates approximately 90 psi.
Do not operate the lift truck if the low air pressure in-
dicator or warning alarm is on.
CAUTION
The drive train can be damaged if the lift truck is trav-
eling too fast when the controls are changed to the
opposite direction.
Inching
Inching is the movement of a lift truck that allows a slow
travel speed while keeping the engine speed high for fast
operation of the lift mechanism.
The lift truck has a brake pedal and an inching pedal. The
brake pedal (right--hand pedal) applies only the brakes.
The inching/brake pedal (left--hand pedal) allows the di-
rection clutch in the transmission to slip and also applies
the service brakes. When the inching/brake pedal is par-
tially applied, the clutch in the transmission is partially dis-
engaged and the movement of the lift truck is slow. When
the inching/brake pedal is fully applied, the transmission is
completely disengaged and the service brakes are ap-
plied.
FAST
SLOW
Property of American Airlines