MODEL DESCRIPTION
26
TABLE 3. CONTROLS (See FIGURE 6.)
ITEM
NO.
ITEM
FUNCTION
1
Autoshift
Control Lever
If the lift truck does not have a Monotrol pedal, travel direction is controlled by
the Autoshift lever. Move the Autoshift lever to the Forward (
F
) position to travel
in the forward direction. Move the Autoshift lever to the Reverse (
R
) position to
travel in the reverse direction. The center position is Neutral (
N
). The Autoshift
lever must be in the Neutral (
N
) position before the engine can be started. The
lever does not move if there is a Monotrol pedal.
The Autoshift lever has four range positions:
1
-- First gear. The transmission stays in this gear until the operator selects
another speed range.
2
-- Second gear. The transmission stays in this gear until the operator selects
another speed range.
1--2
-- This third position allows the transmission to automatically shift between
first and second gears.
D
--This position allows the transmission to automatically shift between all three
gears.
NOTE:
The transmission automatically shifts to Neutral (
N
) if the transmission
oil pressue is low or if the oil is too hot. This happens with the lever in any
position. For emergency conditions, move the key to the
OFF
position and then
to the
ON
position to allow lift truck movement in first gear for 16 to 31 seconds
(normally 30 seconds).
Property of American Airlines
Summary of Contents for CHALLENGER H165XL
