User manual R3
DLCP
- 4 -
96kHz sampling rate
Can be used as a digital pre amplifier
Stand-by mode
On board Molex® Microfit® output connectors
Connector for external Led.
Optional control board with IR receiver for IR control, LCD display and buttons
Optional input board to increase the number of analogue stereo inputs to 4
Link communication (only with two or more modules and in combination with a controller)
1.4
Applications
High-end consumer audio
Digital pre amplifier
Active speakers up to six-way
Three-way stereo active system
PA Systems
Studio Monitors
With 2 modules it is also possible to set up an:
Active 12-channel system
Active 6-way stereo system
Setups are further explained in the “Product overview” chapter.
