User manual R3
DLCP
- 3 -
1
Product description
1.1
Type remarks
The purpose of this manual is to describe the functionality and contents of the Hypex Digital loud-
speaker cross-over Platform (DLCP) from Hypex. This document includes instructions for operating
the board and descriptions of the hardware features. For more detailed information on connectors
and specifications one should read the datasheet.
Before reading this manual, make sure you have the latest version. The latest version can be found
at
www.hypex.nl
1.2
Highlights
Fully user customized filtering
Great audio performance
Field updatable firmware
Current-mode serial I/F
USB audio
Dimensions only: 110mm x 110mm x 30mm
Low weight: 140g
1.3
Features
Compact design
Personal Computer controlled
Input sample rates up to 192kHz
Analogue and digital inputs
Digital balanced audio loop-through
Low-jitter discrete clock oscillator
Balanced audio in and out
Six channel active filtering
Fully user-configurable filters
Firmware updateable by USB
Separate Clock and Data Paths
Six user configurable analogue balanced outputs
High-Level outputs permit direct interface with NC400/
buffered UcD™ ST and HG power amplifiers
Analogue input gain trim
9 local DAC regulators
IIR filtering
Use only a version
2.8
or higher of the Hypex Filter Design program! In earlier versions the DLCP
is not yet implemented.
-
Static electricity can cause damage to this product.
-
The first time the DLCP is used all biquads are zero, so there are no filters installed.
Connecting any speakers and audio input at this point may cause some damage to
them.
-
Take notice on what changes you make, to prevent a setup which can damage your
speakers!
-
After updating the firmware please use the combining PC software downloaded from
our website,
www.hypex.nl
-
…………………………………..
