HYOSUNG GV125S, Owner'S Manual, Page: 95 / 101

—
92
—
N O T E
Avoid spraying or allowing
water
to flow over the
following places :
●
Ignition switch
●
Spark plugs
●
Fuel tank cap
●
Electric fuel injection
system
●
Brake master cylinders
●
Cooling system radiator
●
Snorkel air intake for air
cleaner
●
Electrical
Do not use parts cleaner to
throttle body and electric fuel
injection sensors.
Use a garden hose at low pres-
sure to remove the majority of
dirt or other debris. Wash your
motorcycle by hand with a mild
soap or detergent and water.
Try to thoroughly remove all dirt
and debris without excessive
water pressure. Cloth rags,
washing
mitts or cleaning
brushes can be used, be careful
with brushes as they may
scratch
plastic or painted
surfaces.
Rinse the motorcycle
thoroughly with clean water.
Dry all areas using a chamois
or soft absorbent cloth.
★
WAXING THE
MOTORCYCLE
After washing the motorcycle,
waxing and polishing are
recommended to further protect
and beautify the paint.
●
Only use waxes and
polishes of good quality.
●
When using waxes and
polishes, observe the
precautions specified by
the manufacturers.
★
INSPECTION
AFTER CLEANING
Remove the rags or wrapping
from the exhaust pipe. For
extended life of your motorcycle,
lubricate
accord ing to
“LUBRICATION POINTS”
section.