HYOSUNG GV125S, Owner'S Manual, Page: 86 / 101

—
83
—
6 7
7.
Pull out the rear wheel
assembly rearward.
8.
To replace the rear
wheel assembly, reverse
the complete sequence
listed.
Keep fuel and other
flammable substances away
from electric components.
Before changing a bulb, set
the ignition sw itch to
position
“ ” and allow a
few minutes for the bulb to
cool down.
Wear clean gloves or use a
clean, dry cloth to handle the
new bulb.
Do not put your fingerprints
on the bulb, as this may lead
to overheating and failure.
If you have handled the bulb
with bare hands, clean it with
alcohol to avoid any damage.
DO NOT PULL ON THE
WIRES.
N O T E
Before changing a bulb,
check the fuses.
BULBS