HYOSUNG GV125S, Owner'S Manual, Page: 64 / 101

—
61
—
Never invert the battery
cables. Ensure that the ignition
switch is in
position “ ”
before connecting or
disconnecting the battery,
otherwise some components
might damage.
⊙
CHECK AND CLEAN OF
BATTERY TERMINAL
Clean the battery terminal
when it is dusty or rusted.
1.
Set the ignition switch ― ‖
position.
2. Remove the seat.
3. Check the battery lead wire
and terminal.
4. If necessary : disconnect the
negative
⊖
battery wire first,
then disconnect the positive
⊕
battery wire.
5. Remove the battery.
6. Clean the terminal.
7. If there is white dust, clean it
with warm water.
8. Connect the battery wires
and grease the terminal
lightly.
When reinstalling the
battery, be sure to connect
the positive
⊕
battery wire
first, then connect the
negative
⊖
battery wire.
Make sure to initialize ECU as
following when remounting the
battery due to change the
battery.
To initialize ECU, turn the
ignition switch on and off
alternately five times for 2
seconds.
⊙
BATTERY INSTALLATION
The battery installation need
particular attention to following
points :
1.
Remove the seat.
2. Install the
⊕
positive terminal
of the battery to face the
right side of the motorcycle