HYOSUNG GV125S, Owner'S Manual, Page: 65 / 101

—
62
—
into the battery case.
3. Connect the
⊕
positive
battery wire at the battery
terminal.
4. Put on the rubber cap at the
⊕
positive terminal of the
battery.
5. Connect the
⊖
negative
battery wire at the battery
terminal.
6. Install the battery support
and seat.
If connect the battery wire at
the battery first and then
install the battery into the
battery case, the battery will
be installed in the opposite
direction [the
⊕
positive
terminal faces the right side of
the motorcycle] because the
length of the
⊕
positive
battery wire has no to spare.
If the battery is installed in
the opposite direction, the
battery can't be installed into
the battery case completely
and the electrical problem,
such as a short circuit, may
occur.
●
Keep the battery away
from fires.
●
When disconnecting the
battery wire, be sure to
remove the
⊖
negative battery
wire first with the ignition
switch“
” position, then
remove the
⊕
positive battery
wire.
When reinstalling the battery,
be sure to connect the
⊕
positive battery wire first,
then connect the
⊖
negative
battery wire.
●
Ensure the battery wires are
fastened tightly.
●
Incorrect installation of
the battery will reverse the
terminal position resulting in
possible
electrical system
damage due to incorrect
battery lead connection.
The red lead wire must go to
the
⊕
positive terminal and
the black (or black with white
tracer) lead wire must go to
the
⊖
negative terminal.
●
Never charge a battery
while still in the machine as
damage may result to the
battery or regulator / rectifier.