—
71
—
3
2
1
5
4
3
2
5
4
1. Place the motorcycle on
the center stard.
2. Loosen the rear axle nut
①
.
3. Loosen the drive chain
adjuster lock nuts
②
, right
and left.
4. Adjust the slack in the drive
chain by the chain adjuster
④
, right and left, as
turning the drive chain
adjusting
nut
③
clockwise
or
counter-clockwise.
5. For alignment of the front
wheel and rear wheel,
there are refer
ence mark
⑤
on the same position,
right and left.
Aligning and adjusting the
slack in the drive chain to 20 ~
30 mm (0.79 ~ 1.18 in),
retighten the right and left drive
chain adjuster lock nut
②
and
the rear axle nut
①
securely
and perform a final inspection.
The drive chain for this
motor- cycle is made of the
special material.
The
chain
should
be
replaced with a
428HO
for
motorcycle.
Use of another chain may
lead to premature chain failure.
20 ~ 30 mm (0.79 ~ 1.18 in)
Summary of Contents for GV125S
Page 101: ...98 Circuit Diagram...