HYOSUNG 2010 ST7, Service Manual

Page: 32 / 298

PERIODIC MAINTENANCE 2-14
③
④
ENGINE OIL FILTER
Drain the engine oil as described in the engine oil
replacement procedure.
Remove the oil filter cap
Remove the oil filter.
Install the new O-ring
Install the new oil filter.
Install the new O-ring
and spring to the oil filter
cap.
Install the oil filter cap.
Inspect Interval
Replace Initial 1,000 km and Every 6,000 km thereafter.
OIL FILTER INSTALLATION
LUSTER MATERIAL
HYOSUNG
16510HN910
INSERTED
DIRECTION
OUTSIDE
Add new engine oil and check the oil level as
described in the engine oil replacement procedure.
CAUTION
Before installing the oil filter cap, apply engine oil
lightly to the new O-ring .
CAUTION
When install the oil filter, necessarily,
HYOSUNG character and 16510HN910 part s
NO. install to-ward the outside, otherwise can
damage the engine.
CAUTION
Use HYOSUNG MOTORS GENUINE OIL FILTER
only, since the other make s genuine filters and
after-market parts may differ filtering perfor-
mance and durability, which could cause engine
damage or oil leaks. Hyosung motors genuine oil
filter is also not usable for the motocycles.
WARNING
Engine oil and exhaust pipes can be hot enough
to burn you.
Wait until the oil drain plug and exhaust pipes are
cool enough to touch with bare hands before
draining oil.
①
②