HYOSUNG 2010 ST7, Service Manual

Page: 159 / 298

EI SYSTEM DIAGNOSIS 4-52
⊙ ⊙
IAT SENSOR INSPECTION
The intake air temperature (IAT) sensor ② is
installed at the downside of the air cleaner case.
(Refer to page 4-31)
⊙ ⊙
IAT SENSOR REMOVAL AND
INSTALLATION
● Remove the fuel tank.
●
Remove the IAT sensor from the air cleaner case.
●
Install the IAT sensor in the reverse order of
removal.
⊙ ⊙
RO SWITCH INSPECTION,
REMOVAL AND INSTALLA-
TION
The roll over (RO) switch ③ is located in the down-
side of the fuel tank mounting bolts.
● Romove the front seat.
●
Remove the RO switch from the frame.
●
Install the RO switch in the reverse order of
removal.
⊙ ⊙
WT SENSOR INSPECTION
The water temperature (WT) sensor
①
is installed at
the rear side of the thermostat case.
(Refer to page 4-33)
⊙ ⊙
WT SENSOR REMOVAL AND
INSTALLATION
●
Remove the WT sensor.
● Install the WT sensor in the reverse order of
removal.
WT sensor : 5 ~ 8 N
· ·
m (0.5 ~ 0.8 kgf
· ·
m)
③
①
②