Page 42
11.3 Pressure regulator: inspect valve insert
and strainer
CAUTION!
Risk of injury due to compression spring jumping out.
Ensure that the compression spring is released.
Figure
Step
Action
1
(1 in fig.)
Close ball cocks on inlet and outlet sides.
2
(2 in fig.)
Depressurise pressure regulator:
Unscrew sealing plug and screw in again hand
tight.
3
(3 in fig.)
Release compression spring:
Turn adjustment handle counterclockwise (-) as
far as it will go.
Figure
Step
Action
4
(4 in fig.)
Unscrew spring cover with suitable wrench.
5
(5 in fig.)
Remove sliding ring.
6
(6 in fig.)
Pull out the valve insert off the housing with
the help of pliers.
7
(7 in fig.)
•
Check sealing disc, nozzle and groove
ring for proper condition
•
Replace valve insert, if required
8
•
Push back valve insert into the housing
•
reattach sliding ring
•
Screw on spring cover
9
Adjust pressure: see section 11.5.
