Page 5
1. About this documentation
1.1 Intended
use
This system is a water treatment system for preparing drinking
water, according to current drinking water standards for
desalinated water (conductivity: from 5 to 20 µS/cm).
Desalinated water may e.g. be used for filling humidifiers or any
other system that can be operated using desalinated water.
All components and operating equipment used in the system are
directly or indirectly required to ensure the desired treatment
result.
Any use of the plant and the water produced that differs to that
described in this document is considered to be improper.
The use of components and equipment for other purposes than
their use in the system, as well as the drawing of water for
purposes other than the specified use is deemed improper.
The
water produced, e.g., must not be used as drinking water.
HygroMatik GmbH accepts no liability for damages that occur as
a result of improper use. The risks associated with improper use
lie solely with the operator.
PLEASE NOTE
In order to protect against flooding caused by supply or product
water or drained water, the device location should feature a
pressureless floor grid. In case of non-existance, proper safety
precautions for leakage protection must be considered. Hygro-
Matik may not be held responsable for any damage resulting
from disregard of this recommendation.
PLEASE NOTE
Use of a prefilter (E-7705200) and a 10 µm particle filter (E-
7621028) is recommended.
