Page 35
•
Use only opaque (black) hosing for water hoses.
•
Do not lay plastic hoses taut since they may later
contract. Allow for 50 mm extra length per1 meter of
plastic hosing.
•
Shorten hoses with a suitable hose cutter to ensure
a clean, straight edge.
•
Always insert the hoses straight into the connector to
achieve a tight seal.
.
Note:
Before installation, flush the hoses with compressed air to
prevent possible impurities in the hoses from entering the nozzle
system.
Colors are specified below:
5.3
Checklists
Warning:
The nozzle system is only to be started by qualified,
authorized personnel.
Have the nozzle clearances (minimum distances
and heights) been observed?
Is the vacuum valve mounted at the same height as
all the nozzles it supplies? Are all these nozzles
mounted at the same height?
Are the vacuum and pilot valves installed in the mid-
dle of a nozzle row?
Is the vacuum valve at the same height as the noz-
zles?
Are the hoses from the water outlet line to the vac-
uum valve no longer than 10 m?
Plastic Hose
Color
water
black
atomisation air
control air
white
Summary of Contents for CU-1
